Is my CPU temperature Correct?? (+REP)

299 Views 7 Replies 8 Participants Last post by Guttboy, Mar 16, 2009

sxulocktor

Discussion Starter · Mar 16, 2009

hello!; i have a c0 e8400 OCed to 3.825 with 1.28 vcore and a Xigmatek RS-1283 with the stock 69 cfm cooler and MX-2 Thermal compound.

I have 5 x 40CFM Case coolers (2 for intake and 3 for exhaust)

Well my cpu temp at idle is at 33ÂºC

and at Full load is at about 60 - 62 ÂºC

(temps from Realtemp 2.70)

Are these temps OK?

Save

1 - 8 of 8 Posts

Darkknight512

· #2 · Mar 16, 2009

They should be fine

Save

Reactions: 1

CSU_ComputerMajor

· #3 · Mar 16, 2009

they are safe..but could be lower..i'd say try a reseat, good thermal paste and a can of air on everything...

EDIT: for ****s and giggles..you can do a lapping job...

Save

Reactions: 1

ljason8eg

· #4 · Mar 16, 2009

Sounds about right, but as said before, try a reseat of the cooler if you think temps are too high.

Save

Reactions: 1

redalert

· #5 · Mar 16, 2009

download the newset version of realtemp but temps are in the safe range. Just wondering what your room temp is?

Save

Reactions: 1

Ictinike

· #6 · Mar 16, 2009

Also remember that Wolfdale, E8XXX chips, have a TJMax of 100c.. I'm fairly sure the 8400's are the same as my 8500.

In Realtemp there is an option to set your TJMax so your temps are more accurate. Make sure to confirm your TJMax and adjust the application accordingly.

Save

Reactions: 1

Sasquatch in Space

· #7 · Mar 16, 2009

What program are you loading with?If it's IBT I would say they are just right but if it's Orthos ect. I would do a reapply and reseat.

Save

Reactions: 1

Guttboy

· #8 · Mar 16, 2009

You should be fine.....Ictinike has good advice on the TJ max. I have almost the identical rig as yours.

Save

Reactions: 1

1 - 8 of 8 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month