Overclock.net banner

1 - 15 of 15 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter #1
CPU-AMD Sempron 3200+64 1.8 stock(Overclocked to @2.7Ghz )
MB-Biostar GF8100 M2+ SE
Ram:256MB DDR2533(Hynax..)
GPU:GeForce 7600GS 256MB DDR3

What do you think ?
 

·
Registered
Joined
·
331 Posts
Those older AMD Chips could put up real fits when it comes to stability. Run a Prime95 test, and make sure your voltage is adaquate. Those Semprons devour voltage like nothing else.
 

·
Registered
Joined
·
666 Posts
Looks very good to me man, just verify the max vcore your chip can handle before runing prime95. Never go above that max voltage and you'll be fine!
 

·
Registered
Joined
·
666 Posts
Quote:

Originally Posted by Exml View Post
when get x9-310FSB Prime95 get mi error Ram

Exml
wont you fill up your rig and tell us your volts!? Also add a cpuz validation to give us an idea and help you better!
 

·
Registered
Joined
·
15 Posts
Discussion Starter #9
I am on Linux and is hard to run cpu-z the voltages is 1.6 the ram is on DDR2-400 RAM:voltages is on 2.05 HT is on 600MHz
 

·
Registered
Joined
·
417 Posts
Quote:

Originally Posted by Rocker delMaL View Post
Looks very good to me man, just verify the max vcore your chip can handle before runing prime95. Never go above that max voltage and you'll be fine!
Those 90nm chips can take a lot of volts, 1.55-1.6 as long as temps are still good.
 

·
Registered
Joined
·
828 Posts
+1GHz I say great overclock!


How you cooling that thing and what are your temps?
 
1 - 15 of 15 Posts
Top