Overclock.net banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
Hello, I'm new to the forums and to overclocking. I finally built a rig capable of OCing and after letting the unit just run for a year, I want to start messing with it. I understand some of the basics from friends who've shown me the ropes, but I'm having issues and they don't know what the deal is.

Basically, I can't change my multiplier. In M.I.B, the multiplier is x14 and is listed to be capped at x25. When I turn on AMD control, the computer will not POST. I can manually set the multiplier at x14 and leave the FSB at 200 (or any combination) and she won't post. I can raise the FSB and have gotten it stable up to 216, but shes unstable past that.

Does anyone know what I'm doing wrong?
Any help would be greatly appreciated.

I'm not looking for huge gains, but I know I should be able to get at least 3.2GHz out of her and have it be stable (This information was gathered from Google and Newegg reviews of the chip).
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.