Overclock.net banner

Just got Q6600 stable [email protected]

308 Views 2 Replies 2 Participants Last post by  nardox
the VID is 1.3125, but I tried to decrease the voltage to 1.265ish(1.264 in Windows) and was finally able to get it stable at 3.2Ghz

I ran a OCCT auto test mix 1hr duration, no error and top temp is 59c....
after having bad luck OCing my E7300, I'm even happier with my Q6600 now...
See less See more
1 - 3 of 3 Posts
Is it stable in Intel Burn Test? Remember, use small FFT's to stress the CPU to the maximum. And congratulations!
2
Quote:


Originally Posted by FieryCoD
View Post

Is it stable in Intel Burn Test? Remember, use small FFT's to stress the CPU to the maximum. And congratulations!

haven't done that yet, I will do that later tonight
See less See more
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top