Overclock.net banner

Kingston 4x1gb DDR2 800, OCZ 4x1gb DDR2 1066

1140 Views 11 Replies 6 Participants Last post by  duniek
Everything sold!

Hynix DDR2 667, 2x 1gb 5-5-5-12 @ 1.8v. Budget ram, no heat spreaders, pulled from an e-machines system. $10 shipped for the pair? - sold to Vlasov_581

OCZ Platinum DDR2 1066, 4x 1gb 5-5-5-15 @ 2.1v. Asking $20 shipped for 2x 1gb, or $35 shipped for 4x 1gb. - sold to Vlasov_581

Kingston HyperX DDR2 800, 4x 1gb 5-5-5-15 @ 2.0v. Two sticks match the heat spreader shown on newegg, while the other two have a different style heat spreader. Both have identical model numbers, and ran 4x 1gb without issues. Asking $15 shipped for 2x 1gb, or $25 shipped for 4x 1gb. - sold to Vlasov_581

Q9450 - Lapped by a previous owner, ran at 3.8ghz @ 1.45v under water on a 790i the entire time I had it, at 60-65C. I hit an FSB wall on the 790i so it may do better in a P45 chipset. Asking $110 shipped, chip only. - Sold to playah!

Intel Pentium D 820 - Got this chip with the P5B, I have no idea how well it overclocks, I've only used it for flashing the bios and memtest on various DDR2. Asking $15 $10 shipped.

Q8400 - Ran stock with the stock cooler in an HTPC, no idea the VID or overclock potential. Asking $80 shipped, chip only. - sold to jamieliles!

G.Skill ECO DDR3 4x 2gb,1600mhz, 7-8-7-24 @ 1.35v. Excellent ram, ran the rated timings with zero issues. I haven't tried to overclock this or tighten the timings, but I've heard they generally do quite well with a bit of a voltage bump. Asking $35 shipped for 2x 2gb, or $65 shipped for 4x 2gb. - Sold to Reefa_Madness!

Gigabyte GA-EP45-UD3P, v1.1. Rock solid board, ran it with a Q9550 @ 4ghz without issues, but I'd rather keep a DDR3 system so the Q9550 is going into the 790i and this has to go. Asking $75 shipped, will come with orig box and IO plate, I can't seem to find the manual or any of the accessories. - Sold to Reefa_Madness!

Corsair XMS2 DHX, 4x 2gb, 4-4-4-12 @ 2.1v. - Sold to Nanoscale!

2x Asus P5B - Decent 775 board, I've updated the bios on both to the latest (2104) so it should support nearly any 775 cpu, as seen here. CMOS battery may need replaced, both were missing a battery and I threw spares I had laying around, but unsure if they have a charge. One with IO Plate, one without. Asking $35 shipped for the one with, $30 shipped without. - Sold to Reefa_Madness!

Currently looking for a reference GTX 470, preferably EVGA. Other components from my part-out going up in the respective sections.

Prices are US50, I can't get the flag to stick in the classified for some reason. I'll consider shipping outside of the US, but at the buyer's expense.
See less See more
1 - 12 of 12 Posts
YHPM.
Funds have been transferred for the Gigabyte GA-EP45-UD3P, v1.1 motherboard.
hey lmk about those asus boards, i may be interested in that and the e8400.
Quote:
Originally Posted by itsMEnara View Post

hey lmk about those asus boards, i may be interested in that and the e8400.
It's actually a Q8400, the quad-core. I'll be testing both P5B boards tonight, I was told one was working and the other is dead, but always best to check myself.

PM's replied to.
YHPM.
Funds have been sent for the following:
Quote:
G.Skill ECO DDR3 4x 2gb,1600mhz, 7-8-7-24 @ 1.35v. Excellent ram, ran the rated timings with zero issues. I haven't tried to overclock this or tighten the timings, but I've heard they generally do quite well with a bit of a voltage bump. Asking $35 shipped for 2x 2gb, or $65 shipped for 4x 2gb.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231321&nm_mc=AFC-C8Junction&cm_mmc=AFC-C8Junction-_-RSSDailyDeals-_-na-_-na&AID=10521304&PID=4003003&SID=vz6wqu5wsiw6
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top