[tytlyf]

dude, dont use a divider with your memory...that memory can run 1:1 with your FSB. You are losing performance by running it the way you are.

 

[tytlyf]

you know that memory tab you show in CPUZ, that is your memory speed.
You want your memory divider to be 400, and not 333.
You want your memory timings to be 2.5-3-3-6 1T 2.7v

 

[tytlyf]

Quote:

Originally Posted by ThaWaxShop (your ram wont run a 268fsb at 1:1)

umm...yes it will...that's very excellent TCCD and doesn't like high volts. I wouldn't go over 2.7v.
That memory should be able to run close to 290mhz 1T 2.5-3-3-6. So this leads me to believe, you are setting something wrong.
Read more overclocking guides

 

[tytlyf]

Quote:

Originally Posted by ThaWaxShop ahem TCCD like up to 2.9 and the newer chips like up to 3.1 ttp://www.techpowerup.com/memdb/memdetails.php?id=c9

I was talking about for his clock of 265, I wouldn't go over 2.7. It's not necessary, it should do that speed with 2.6v.
I myself haven't dared to put 2.9v into my TCCD, too much voltage and most tests show it to have a negative effect.
I was correcting you on not thinking the OCZ EL will run 265 2.5-3-3-6 1T.

 

[tytlyf]

the ram has nothing to do with you hitting 3ghz. the ram wont limit your overclock in any way.
RMA your sticks asap. You paid good money for the TCCD chips, and you got some junk that should cost $50 less. Get the correct memory.