[ThaWaxShop]

ahem TCCD like up to 2.9 and the newer chips like up to 3.1

http://www.techpowerup.com/memdb/memdetails.php?id=c9

 

[tytlyf]

Quote:

Originally Posted by ThaWaxShop ahem TCCD like up to 2.9 and the newer chips like up to 3.1 ttp://www.techpowerup.com/memdb/memdetails.php?id=c9

I was talking about for his clock of 265, I wouldn't go over 2.7. It's not necessary, it should do that speed with 2.6v.
I myself haven't dared to put 2.9v into my TCCD, too much voltage and most tests show it to have a negative effect.
I was correcting you on not thinking the OCZ EL will run 265 2.5-3-3-6 1T.

 

[kitt3]

Quote:

Originally Posted by tytlyf umm...yes it will...that's very excellent TCCD and doesn't like high volts. I wouldn't go over 2.7v. That memory should be able to run close to 290mhz 1T 2.5-3-3-6. So this leads me to believe, you are setting something wrong. Read more overclocking guides

no iam sure not setting anything wrong. First i updated the BIOS so it will work on optys. Then started overclocking.

Multiplayer is x11

FSB 268mhz

HTT x3

Vcore 1.55v

Memory Max Clock ***333mhz***

Vdimme 2.85v

Pci synchronization mode 33.33ghz

*** current timings***

2.5-3-3-7

what is wrong in that ? i even had to reset the BIOS just in case i changed a number by mistake and reoverclocked with ur method it hangs in post.

 

[kitt3]

omg now i know...........

i opend my pc and i took out the ram i read the sticker that was on it, it says

pc3200 ocz el 2-3-2-5 . On the other hand, the ocz el in newegg.com says 2-2-2-5

i got bad ram or wat????????????

 

[kitt3]

Well this sux this is wat i found and no wonder why i wasnt able to run ddr400

Code:

Those sticks use Infineon IC's and they do not OC like the rest of the Platinum line. 210-220 depending on the board at 2.5-3-3 or 3-3-3 is about it. More than 2.7V with these just makes them unhappy

Now iam going to start to look for new timings for this cheap ram :S

 

[sccr64472]

Quote:

Originally Posted by kitt3 Well this sux this is wat i found and no wonder why i wasnt able to run ddr400 Code: Those sticks use Infineon IC's and they do not OC like the rest of the Platinum line. 210-220 depending on the board at 2.5-3-3 or 3-3-3 is about it. More than 2.7V with these just makes them unhappy Now iam going to start to look for new timings for this cheap ram :S

Sounds like you have some Hynix chips. You should be able to squeeze 230 mhz out of them with 2.5 3 2 6 1T at 2.8 volts.

 

[tomasro]

they should be warrantied to 2.9volts though

 

[kitt3]

Hum but which is better

2.5-3-3-7 2t with 2.85v and divider of 333mhz with 268 fsb

or

2.5 3 2 6 1T at 2.8 volts ( no divider of course ) with 230fsb is that correct?

 

[Some_Idiot2]

Quote:

Originally Posted by kitt3 Well this sux this is wat i found and no wonder why i wasnt able to run ddr400 Code: Those sticks use Infineon IC's and they do not OC like the rest of the Platinum line. 210-220 depending on the board at 2.5-3-3 or 3-3-3 is about it. More than 2.7V with these just makes them unhappy Now iam going to start to look for new timings for this cheap ram :S

RMA maybe?

 

[kitt3]

Quote:

Originally Posted by Some_Idiot2 RMA maybe?

bought them localy meh , iam going to contact the seller tomorow man i never i have a good luck . Just one question u think i can hit 3ghz with this ram even tho i got it right now at 2.95ghz!!

 

[tytlyf]

the ram has nothing to do with you hitting 3ghz. the ram wont limit your overclock in any way.
RMA your sticks asap. You paid good money for the TCCD chips, and you got some junk that should cost $50 less. Get the correct memory.

 

[kitt3]

i hate RMA'ing takes so long , ill contact them and see wat happens.

 

[klnospicy]

humm... i got an opt 148 from newegg when it was $220..
i got it already and the highest i got is 3.2 so far with watercool but personally i never get it stable above 3.0!! if 2.9 i could run prime for over 10 hours.. but once it get over 3.0 it will pass 2 hours...
funny thing is the one that i have is 0.13Y compare to 0.9mm...
well i tryed over 1.65v but samething happen, but over i am very happy cos i only play $220 for it

 

[kitt3]

Quote:

Originally Posted by klnospicy humm... i got an opt 148 from newegg when it was $220.. i got it already and the highest i got is 3.2 so far with watercool but personally i never get it stable above 3.0!! if 2.9 i could run prime for over 10 hours.. but once it get over 3.0 it will pass 2 hours... funny thing is the one that i have is 0.13Y compare to 0.9mm... well i tryed over 1.65v but samething happen, but over i am very happy cos i only play $220 for it

i dont get it , u can go with 1.6vcore and u cannot be stable on 3ghz? many ppl were stable at that Vcore!!