Overclock.net banner

Looking for a special fan :D

993 Views 36 Replies 8 Participants Last post by  KingCuddles
Heya people.

Working on a little idea, am looking for a case fan, needs to be 140mm, at least. 200mm+ is better yet. This may sound simple but i have some requirments...

1) UK only
2) less than £10 ea, the less the better
3) needs to be in a square housing

Come on OCN do me proud
.
See less See more
1 - 20 of 37 Posts
Most fans are in a squared housing??? but anything over 140mm will more than likely be in a circled housing
Oh and BTW it would help if the fan was actually decent.
Quote:


Originally Posted by [email protected]'D
View Post

In a square housing wgfinisugo;jfdiofnddf Why?

Ahhhh that would be telling, basicly to be of any use it has to be square, if it could be round i would just buy some antec big boys.
See less See more
2
Quote:


Originally Posted by Socom
View Post

Well, if you want a nice side panel....http://www.industrialfansdirect.com/LFI-TF10-D162.html

Were did a new side panel come from :S
See less See more
140mm, can we not get bigger?
Yess but most if not all over 140mm are in round housing and getting more expensive than £10

And the ones under a £10 \\/\\/\\/\\/\\/

http://www.scan.co.uk/Products/220mm...LUE-LED-lights

http://www.scan.co.uk/Products/AKASA...th-5LED-lights
Has to be square.

But I can raise my price, should the right fan come along.
will that do?
ebuyer almost always wins http://www.ebuyer.com/product/161520
See less See more
Looking at my highly advanced, very detailed scribbles


140mm would be too tight 200mm is the min. Sorry for my misleading first post.

If i know OCN i know they like a challenge.
See less See more
A challenge that may just be impossible, I shall keep looking though

I'm out. looked on all the cooling websites I know and eveything above 140mm isn't in a square housing. Sorry
Quote:


Originally Posted by [email protected]'D
View Post

A challenge that may just be impossible, I shall keep looking though

No such thing as impossible, mearly levels of difficulty.
See less See more
-.-
throwing a pea to the moon, I bet that is impossible


Good luck trying to find a fan, doubt there is one though?

Couldnt you make a square housing to fit a 220mm fan inside?

And why does it have to be square?

Couldn't you usie an acrylic sheet cut out a hole for the 220mm fan then cut it out in the shape of a sqaure if you get me?

Something like this Red= acrylic
*paint LOL*



Not too scale!
See less See more
2
Looks like i mite need to edit my scribbles -.-
working on a new case, square is the only shape tht would work.
1 - 20 of 37 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top