[Razzal]

I am still learning all the ins and outs of overclocking but I have come to realize the ram i have is just not going to cut it for any ocing. Based on my system build what would be a quality ram for a total system oc instead of just using the multiplier which is what i am currently limited to because of my ram. Any thoughts or suggestions would be greatly appreciated : )

 

[dixson01974]

I would go with some good DDR3 2000 8-8-8. Which you can get them to run 1600 7-7-7 and you can get the FSB to about 300-320.

 

[Razzal]

Quote:

Originally Posted by dixson01974 I would go with some good DDR3 2000 8-8-8. Which you can get them to run 1600 7-7-7 and you can get the FSB to about 300-320.

Is there a certain one you would recommend in particular?

 

[dixson01974]

Quote:

Originally Posted by Razzal Is there a certain one you would recommend in particular?

If you can find them I would go with these.
Super Talent Project X Series DDR3-2000 or Super Talent Chrome Series DDR3-2000.

 

[xd_1771]

If you don't fancy being on the very high end of pricing, grab a set or two of low timings 1600Mhz Ripjaws X and call it a day

 

[Razzal]

Thanks for all the help I ended up going with these I got a good deal on them and they seem to be pretty overclockable, was told i should be able to get these to 2000mhz with a small voltage jump and 9-10-9-27 timings, either way it is an upgrade from the g.skill crap i had before

 

[xd_1771]

Oh, you needed a 2x4GB kit. If you said so, we'd have suggested you the 1600 CL9 Ripjaws for $75 or the 1600 CL8 Ripjaws for $85 - both better for cheaper IMO.