Overclock.net banner

1 - 1 of 1 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
First this my first ever use of an EVGA motherboard. I only went with board because was lucky enough to win it in a giveaway. In the past I've used either ASUS or Gigabyte exclusively and am pretty familiar w/ their layouts and what they call things in the UEFI/BIOS. At any rate my point. I don't see an entry in the UEFI for CPU Strap nor do I see anything regarding the Uncore. I see the term RING is this the equivalent of Uncore? Any assistance any one may be able to provide is greatly appreciated. Would be nice if there was just a standard in the terminology used.

I have a side question regarding the RAM as well. I'm using 16GB of Corsair Dominator 3000 DDR4 ram and when using the XMP profile, it sets my BCLK to 125. Should I use this and try to OC w/ that enabled or set the XMP then change the BCLK to 100 and OC from there? Thanks again and sorry if these seem very noobish.
 
1 - 1 of 1 Posts
Top