Overclock.net banner

Lower Voltage?

707 Views 10 Replies 6 Participants Last post by  18 is # 1
Greetings,

Recently I added a second pair of 2GB Dominator sticks to my setup for a total of 8GB. As expected, I was unable to run all four sticks at their stock (1066MHz) speed at the stock voltage. Rather than risk damaging them with overvolting, I decided to underclock them to match my FSB speed. I was able to tighten the timings to 4 4 4 12 from the stock 5 5 5 15 to make up for some of the speed loss, and I hope to be able to lower them a bit more.

Here's the question, though. With the lower clock speed and given the tighter timings, should I reduce the voltage from the stock 2.10v?
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top