Overclock.net banner
1 - 11 of 11 Posts

·
Registered
Joined
·
424 Posts
You can use one of them big circular drill bits, the ones for cutting circles, or if you can't get one of them you can always use a dremel but this could be tricky. I did mine with a dremel and lets just say the holes could of been better.
 

·
Registered
Joined
·
73 Posts
Quote:


Originally Posted by rhoel

The hole saw is the way to go. It just takes a few seconds and you are done. I couldn't imagine doing it with a dremel.

dremels alot of work, mine started as a decagon ish creature then i put the sanding bit on and made it a circle, looks decent tho
 

·
Premium Member
Joined
·
13,104 Posts
i used a jigsaw with a precious metals blade

worked absolutely perfect, i put down a layer of masking tape then cut it.. no shards or anything, a nice smooth surface
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top