Overclock.net banner
1 - 10 of 10 Posts

·
Banned
Joined
·
4,996 Posts
Discussion Starter · #1 ·
whats the max temp for pwm phase chips

my load at 65~75c
given the chip (5 on my mobo)
normal loads are about 50~55c
idle is about 38~42c

should I get a fan to put on the sink or just leave it as is
 

·
Banned
Joined
·
3,931 Posts
Here is what I found.
Looks like it's normal
smile.gif

Same board as yours BTW
8x45012_140vc_Prime21Hr.jpg


EDIT : He has a 60mm fan on it, which lower the temps by a good 10*C.
If you could grab an Antec Spot Fan it would be perfect
smile.gif

They cost around $15 bucks and can help your overall case temp !
I hope I helped !

EDIT 2 :
Without the fan :
8x465120_1.png
 

·
Banned
Joined
·
3,931 Posts
Quote:
Originally Posted by 3dfxvoodoo;14128538
thinking.gif


looks like I fine
might put a fan on it tho

thanks for all the help
I night have an 40mm setting around here
It would be an awesome decision.
Dust and Heat = Computer killers
sniper.gif

It looks like you only need a tie wrap or two to fix it
cool.gif
 

·
Banned
Joined
·
4,996 Posts
Discussion Starter · #5 ·
found one
it's a old old radio shack fan lol
Quote:
Originally Posted by Abs.exe;14128578
It would be an awesome decision.
Dust and Heat = Computer killers
sniper.gif

It looks like you only need a tie wrap or two to fix it
cool.gif
ya my mobo cam with clamps
just have to find them
 

·
Data Recovery Engineer
Joined
·
20,228 Posts
Zip ties work too if you cannot find them.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top