[ENTERPRISE]

Im looking 2 increase my memory voltage but would it be o.k to go from 2.6 to 2.8v is it safe ??

 

[Jack]

Yea, I have mine at 2.85v and no probs. Its rated voltage is 2.6v. You get more stability and better OCs, but careful with the temps, I noticed a bit of an increase when I touched it so I put a fan blowing right into it

 

[ENTERPRISE]

Yeah dats kl ive got 5 case fans running at da mo

 

[Jack]

I can beat that, I got the side panel off lol

 

[ENTERPRISE]

lol....I just went into my bios...is it the dimm voltage i have to put up by 2v and another setting is that i should put it to 333mhz is dat right ?

 

[Jack]

Hmm... you want it to run with a divider? With 2.8v of vdimm you should try running it async with the CPU (400Mhz, or 1:1 for your ram). If you can't get OC you want, then try using a divider, but try loosening the timings first. You'll get a better performance with loose timings than with a divider and tight timings.

 

[ENTERPRISE]

Well what i was rely asking is that was it right what i did

 

[Jack]

Try the highest dimm voltage you can (prolly 2.8v) and 400Mhz.

 

[ENTERPRISE]

o.k cheers mate for your help i have left some rep points for ya ..but one more question what is ''linear mode''?

 

[gibant1]

Linear mode is when your memory is running at a 1:1 ratio with your CPU.
(What you want)

 

[Jack]

Oh, thanks gibant1.. didn't know that. Reps for you

 

[ENTERPRISE]

Cheers Guys Rep For Both Of Ya