[jaKalaKn]

Hey Guys

I have a question for any MESHIFY C owners.

If you take out the drive bay (I'm only using SSD) what is the max size PSU I can get in there? Fractal website says 170 I think but was hoping that someone who has one could check to see if without the drive bay weather or not you could slide a longer PSU in?...

Problem is I have a perfectly good AX1200 from a few years ago and was hoping to use it in this case.

Any help would be appreciated. thumb.gif

 

[NV43]

I'll get back to you this afternoon on this when I'm home from work if no one answers beforehand.

 

[NV43]

I'm very sorry about the delay on this. If you remove the drive cage you can fit up to a ~160mm power supply in there from what I can tell.

 

[jaKalaKn]

Thanks.... One of my mates ended up getting one... from our measurements:

With drive bay out: A 200mm would fit but I would have to raise the the rubber grommets by about 3-4mm to match the height of the raised drive mesh area. Also would probably edge the PSU with rubber tape so i dont have metal on metal in this area too.

With Drive Bay: Fractal says, " Maximum 175mm recommended"