[Gawdz]

Aye im waiting on my case to arrive tomoz and i was just testing my mobo on its box with the cpu installed and the RAM and a video card and i power it up all the fans spin but no bios beep or no display signal, i tried the onboard video same thingwhat could this be? I will upload some pics soon.

 

[mbudden]

Have you ruled out faulty hardware? Have you tried booting with one stick of RAM etc?

 

[Gawdz]

I just tried booting with 1 stick of RAM and no diff, its a new board but a friend gave me the Pentium D

 

[blue_decamax]

should check whether the board support the cpu or not. check bios update also....

 

[2thAche]

Given that you know everything is compatible:

Clear CMOS and try again.

If still no beep or display %90 of the time it's the PSU (%100 if it's that 400W Superflower in your sig). Regardless of the brand, watts, or how new your PSU is, plug the system up with another good PSU and see if it boots.

 

[Skripka]

According to this:

http://www.cpu-upgrade.com/mb-ASUS/P5G41C-M_LX.html

http://support.asus.com/cpusupport/l...aY16Bgg3U1mAW1

Your motherboard does not support PentiumDs.

 

[Gawdz]

Well i cant exactly find the model number of my CPU its this for sure http://ark.intel.com/Product.aspx?id=27521 but i know it runs @ 3.4ghz

 

[TwoCables]

Quote:

Originally Posted by Gawdz Well i cant exactly find the model number of my CPU its this for sure http://ark.intel.com/Product.aspx?id=27521 but i know it runs @ 3.4ghz

CPU-Z will tell you.

 

[Gawdz]

Quote:

Originally Posted by Skripka According to this: http://www.cpu-upgrade.com/mb-ASUS/P5G41C-M_LX.html Your motherboard does not support PentiumDs.

Oh ****. Wouldn't happen to support Celeron Ds?

Wait i found this http://www.asus.com/product.aspx?P_I...AW1&templete=2 this is a CPU Support update sortta thing am i right?
Sorry for the bad description im only 13.

 

[TwoCables]

Oh. That's why it isn't functioning properly.

 

[Gawdz]

Quote:

Originally Posted by TwoCables CPU-Z will tell you.

I cant exactly run this software because my mobo wont boot.

 

[Skripka]

Quote:

Originally Posted by Gawdz I cant exactly run this software because my mobo wont boot.

If you have spare TIM laying around, just pop off the CPU cooler and read what is printed on the CPU IHS lid. Model # should be right there.

If it ain't on the support list, then you don't even need to bother remounting, as it won't work with that motherboard.

 

[TwoCables]

Quote:

Originally Posted by Gawdz I cant exactly run this software because my mobo wont boot.

Well I guess finding out which one it is doesn't matter anymore because now we know that the culprit is that the mobo doesn't support any Pentium D processor.

 

[Gawdz]

TIM? well doesn't look like my Celeron D is supported either so is it possible for that update to work if not....

IM IN NEED OF A CHEAP CPU!

 

[2thAche]

Quote:

Originally Posted by Skripka According to this: http://www.cpu-upgrade.com/mb-ASUS/P5G41C-M_LX.html http://support.asus.com/cpusupport/l...aY16Bgg3U1mAW1 Your motherboard does not support PentiumDs.

Ouch

 

[TwoCables]

Quote:

Originally Posted by Gawdz TIM? well doesn't look like my Celeron D is supported either so is it possible for that update to work if not.... IM IN NEED OF A CHEAP CPU!

What about that E8400 you were lookin' at?

 

[Gawdz]

Yes they are supported but i'd rather sell my mobo, my Celeron D and Pentium D and my old case and keep saving for my i7 setup or wait for christmas or something.