[jetplane48]

Which should i pick? i want the most bang for the buck and will be OC'ing a Q8200 with this and want to get more than 3.3Ghz+

please help me choose!

 

[ben h]

id go with the mugen
also did u look at the sheet i posted for bios settings

 

[BlackHoleSon]

Mugen 2 is a better heatsink, but the Hyper 212+ is nice because it already comes with everything for push/pull except a fan - it comes with black plastic clips that screw on and rubber vibration-resistant sticky pads.

 

[jetplane48]

Quote:

Originally Posted by ben h id go with the mugen also did u look at the sheet i posted for bios settings

well, tell me why you would go with the Mugen...also, please post it again as i didnt see it

Quote:

Originally Posted by BlackHoleSon Mugen 2 is a better heatsink, but the Hyper 212+ is nice because it already comes with everything for push/pull except a fan - it comes with black plastic clips that screw on and rubber vibration-resistant sticky pads.

Oh this might be the winning decision

although i just want to push my Q8200 3.3Ghz+

 

[ben h]

Code:

CPU =q8200
Motherboard = EP45-UD3P
BIOS Version =FD
Ram = Kingston 4GB

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: turbo
CPU Clock Ratio .............................: 7X
Fine CPU Clock Ratio.....................:
CPU Frequency ..............................:3.15ghz (450X7)

Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: enabled
CPU Host Frequency (Mhz) ............:450
PCI Express Frequency (Mhz) .........:100mhz
C.I.A.2..............................: disabled

DRAM Performance Control
Performance Enhance..................:standard
(G)MCH Frequency Latch...............:auto
System Memory Multiplier ..............: 2.0D
Memory Frequency (Mhz) ..............: 900
DRAM Timing Selectable ................:auto

Standard Timing Control
CAS Latency Time........................:5 auto
tRCD .............................................:5 auto
tRP............................................... ..:5 auto
tRAS.............................................. :18 auto

Advanced Timing Control
tRRD...........................................:3 auto
tWTR..........................................:3 auto
tWR............................................:6 auto
tRFC...........................................:52 auto
tRTP...........................................:3 auto
Command Rate (CMD) ....................:0 auto

Channel A
Static tRead Value.........................:8 auto
Channel B
Static tRead Value.........................:8 auto

Motherboard Voltage Control
CPU
CPU Vcore….………..............1.23750V............:1.250 V
CPU Termination…..... 1.200V*...............:1.2V
CPU PLL…………………....1.500V*.......:normal
CPU Referen.…………....0.760V*...........: normal

MCH/ICH
MCH Core…………….....1.100V...........:1.3V
MCH Reference….…….0.760V............:normal
MCH/DRAM Ref.…......0.900V..............:normal
ICH I/O……………….....1.500V............:normal
ICH Core…………...……1.100V...........:normal

DRAM
DRAM Voltage ……....1.800V............:1.8V
DRAM Termination .…0.900V............:.9V
Channel A Reference 0.900V............: normal
Channel B Reference 0.900V............: normal

and iv seen better temps with the mugen with close to the same o/c but the mugen had cooler temps

 

[Mygaffer]

Mugen 2 has much better cooling. My friend has used the 212 and I have used the Mugen 2. The 212 is cheap, and not a bad cooler, but I'll just say that my friend ended up returning the 212 and getting something better.

 

[jetplane48]

well, does anyone have a graph showing the temps and the CFM and the DBA and that sort?

 

[ben h]

Quote:

Originally Posted by jetplane48 well, does anyone have a graph showing the temps and the CFM and the DBA and that sort?

mugen
Noise Level:
0 - 26.50 dBA

Air Flow:
0 - 74.25 CFM = 0 - 126 m³/h
http://www.coolerguys.com/840556088660.html

 

[michaeljr1186]

see sig.

 

[awaizy]

The Mugen 2 if you can afford it. If not, the 212+ is a great value.

 

[overquad]

I have the coolermaster n212+ it is insufficient for my build, however should be ok for yours. I would personally go elsewhere, I consider the n212 to be a good replacement for stock but not for heavy overclocking. go with the mugen

 

[jetplane48]

I am definitely going for the Mugen

rep to all who said Mugen!

 

[ben h]

good choice

 

[jetplane48]

Quote:

Originally Posted by ben h good choice

well, its definitely worth the extra $20 i suppose

 

[ben h]

Quote:

Originally Posted by jetplane48 well, its definitely worth the extra $20 i suppose

the mugen is only 40$ and the hyper is like 35$ soo thats only 5$ extra lol

 

[Turdle]

Quote:

Originally Posted by jetplane48 I am definitely going for the Mugen rep to all who said Mugen!

Woot for mugen 2! I'm getting one too