Joined
·
12,588 Posts
That is impossible as your computer would shut down with lack of power to that degree.
its OCCT reading the 12V accessory RAIL as the 5V SATA RAIL
its OCCT reading the 12V accessory RAIL as the 5V SATA RAIL
My 12v rail reads at 5v?
I'm just really curious what this is all about. OCCT always shows my 12v at 5v when ever it finishes any testing. I want to say I've seen it shown as such on other graphs as well, but at the moment I can't think of where that might have been to back that claim up. So for now we'll just say OCCT.
I'm not terribly worried as it's done it since I built a month ago and I've never noticed any strange performance to say everything isn't fine. Just really curious what could be causing this.
What other sources could I use as well to get a reading on my 12v line?
Thanks.
I'm not terribly worried as it's done it since I built a month ago and I've never noticed any strange performance to say everything isn't fine. Just really curious what could be causing this.
What other sources could I use as well to get a reading on my 12v line?
Thanks.
