Overclock.net banner

My NB is unstable even with volts

371 11
i just needed to add .1v to get to 25xx and for the next step which is 28xx i needed to put .15 to boot but even with .275v it wont run prime for more than 2 mins

stock is 1.1
1 - 12 of 12 Posts

·
Iconoclast
Joined
·
33,750 Posts
Quote:
Originally Posted by exzited;14209986
I think in going to retry this after my water cooling comes in. Do temps affect the NB at all?
Yes.

The cooling on my 555BE is total overkill (lapped TRUE, 120x38mm Panaflo high speed) and that certainly has something to do with it's ability to reach decent NB speeds, given it's an utterly mediocre chip in every other way.
 

·
Registered
Joined
·
513 Posts
Discussion Starter · #8 ·
Quote:
Originally Posted by Blameless;14210022
Yes.

The cooling on my 555BE is total overkill (lapped TRUE, 120x38mm Panaflo high speed) and that certainly has something to do with it's ability to reach decent NB speeds, given it's an utterly mediocre chip in every other way.
alright all just have to wait for my rasa kit to some in. what temps are you getting on that x2
 

·
Iconoclast
Joined
·
33,750 Posts
Quote:


Originally Posted by exzited
View Post

alright all just have to wait for my rasa kit to some in. what temps are you getting on that x2

About 20-25C above room temp at maximum load. 4GHz/1.525v core, 2.83GHz/1.375v NB.
 

·
Registered
Joined
·
1,646 Posts
Quote:


Originally Posted by giganews35
View Post

I think I will disable 4 cores and see how the 1090t overclocks on just 2 cores.


Be sure to disable the ones that require most voltage. My two last ones need 0.05v more than the other 4 so I just disabled them
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top