[joharrisderby82]

My new raijintek Triton AIO Water Cooling Solution, just installed nice temps on my overclocked i5 2500k
Temps around 28 idle but in a warm room and nzxt h440 case
will run intelburntest in the morning to post back results

http://www.overclockers.co.uk/showproduct.php?prodid=HS-016-RT&groupid=701&catid=2330

http://imageshack.com/i/pcUVoQOXj

 

[lucifeil]

Would definitely be interested to see if you could add a GPU block to this without too much of a drop in performance!

 

[BakerMan1971]

Quote:

Originally Posted by lucifeil

Would definitely be interested to see if you could add a GPU block to this without too much of a drop in performance!

There are some pictures and forum posts in German around the web, that show it can be done, here is a LINK

I have just ordered my Triton so should have it in a few days
Looking forward to my first liquid cooing experience.

 

[Emperor2005]

Here's a pic of my installed Triton! It's running almost silent with 2 Alpenföhn Wing Boost 2 Snow White inside my CM Storm Stryker.

Had to wait almost 2 weeks before receiving...

 

[BakerMan1971]

it is looking sweet though, Here in the UK deliveries have been a little crazy due to the whole Black Friday nuttiness.

 

[Fantomau]

i got one of these and theres a void sticker right over the fill port screw and no dyes in the box

 

[lucifeil]

Quote:

Originally Posted by BakerMan1971

There are some pictures and forum posts in German around the web, that show it can be done, here is a LINK

I have just ordered my Triton so should have it in a few days
Looking forward to my first liquid cooing experience.

Thanks for the link, i can't read german, but it does seem that the poster is getting some pretty good results with a GPU that is only about 25degrees above ambient!

 

[BakerMan1971]

Quote:

Originally Posted by Fantomau

i got one of these and theres a void sticker right over the fill port screw and no dyes in the box

There is a notice on the Overclockers uk product page stating that the warranty will still be honoured providing no excessive modification or abuse is detected.

I feel quite happy removing the sticker

Mine has arrived, although it will be after Christmas before I get it installed , busy busy and all that.

Did a power on test though checking it for leaks etc and it runs great, the pump seems very powerful and is incredibly quiet, I had to put my ear to it to hear it over my case fans.

Will post up results in my build log in my sig for Pew pew reactor.

 

[Fantomau]

Quote:

Originally Posted by BakerMan1971

There is a notice on the Overclockers uk product page stating that the warranty will still be honoured providing no excessive modification or abuse is detected.

I feel quite happy removing the sticker

Mine has arrived, although it will be after Christmas before I get it installed , busy busy and all that.

Did a power on test though checking it for leaks etc and it runs great, the pump seems very powerful and is incredibly quiet, I had to put my ear to it to hear it over my case fans.

Will post up results in my build log in my sig for Pew pew reactor.

how do you connect this to the cpu fan header?

is it possible to use different fittings/tubing/coolant?

mine:

 

[BakerMan1971]

Quote:

Originally Posted by Fantomau

how do you connect this to the cpu fan header?

is it possible to use different fittings/tubing/coolant?

mine:

You would need to get an adapter cable, the one supplied is designed to connect directly to molex, because you don't want the system PWM or Voltage reducing your pump.
If you set the CPU fan header to constant max, then a standard 3-pin fan extension lead should do the trick.

Take the opportunity to connect the rad fans to the cpu / mobo headers and see how that goes?

 

[Fantomau]

Quote:

Originally Posted by BakerMan1971

You would need to get an adapter cable, the one supplied is designed to connect directly to molex, because you don't want the system PWM or Voltage reducing your pump.
If you set the CPU fan header to constant max, then a standard 3-pin fan extension lead should do the trick.

Take the opportunity to connect the rad fans to the cpu / mobo headers and see how that goes?

couldnt i connect the cable w/ 4pin molex to the pump, set my bios to ignore cpu fan error and connect the fans to a fan controller?

 

[BakerMan1971]

I suppose so, its just every time you reset or change bios (think overclocking) you will have to deal with the CPU fan failed stuff

 

[Fantomau]

does the top of the pump have protective cover that comes off? mine came with alot of scratches on top.

 

[BakerMan1971]

it looks like protective film to be oh so slowly peeled away (feels great doesn't it?

)

I noticed from your picture you have the red dye in there but still have the warranty sticker attached?

I think the cooler has a cleaner look without the sticker, and as per my earlier comment, the warranty should be good against any genuine manufacturing defects.

 

[Fantomau]

Whats odd is 1 loop on mine is darker red, while the other is lighter.

can i connect this to a 4pin molex on my psu without installing it to see if the color changes. lkooks odd with 1 side light/the other side dark.

as for the sticker, i took it off, that pic was an earlier pic

mine didnt come with bottles of dye, it was already red

 

[joharrisderby82]

what sort of temps are you all getting

 

[BakerMan1971]

Quote:

Originally Posted by Fantomau

Whats odd is 1 loop on mine is darker red, while the other is lighter.

can i connect this to a 4pin molex on my psu without installing it to see if the color changes. lkooks odd with 1 side light/the other side dark.

as for the sticker, i took it off, that pic was an earlier pic

mine didnt come with bottles of dye, it was already red

Sounds like the dye hasn't run through properly yet, why was it already red?

Yes hook it up to a molex, the pc won't mind as it will still have the old cooler on, you only need to connect the pump and it will run, in fact its advisable to do that to check for leaks.

joharrsiderby82: haven't installed mine yet but I will post temps etc here

 

[Fantomau]

Quote:

Originally Posted by BakerMan1971

Sounds like the dye hasn't run through properly yet, why was it already red?

http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&N=100008008&IsNodeId=1&Description=RaiJintek&name=Water%20%2f%20Liquid%20Cooling&Order=BESTMATCH&isdeptsrh=1

 

[BakerMan1971]

well I know overclockers in the UK offer a modded version with choice of Dye, but they also sell the standard version
I bought mine from Watercooling UK no-one over here offers them with the default dye already in.

 

[Fantomau]

My Raijintek Triton