Overclock.net banner
1 - 4 of 4 Posts

· Registered
Joined
·
1,224 Posts
nice work, you finally getting it running
...I would change some of your memory settings, If you want, I will give you my complete settings. I would also decrease your voltage to your CPU at that speed. You should be able to get stable with around 1.5v (cpuz). In your bios, set your VID+VID special to equal =1.55v
try 1.375 + 113% for 2.9ghz.
Use this chart, print it, and you will know what each setting does..

 

· Registered
Joined
·
1,224 Posts
I see in your sig you are "soon2mod" your mobo, what do you plan on doing? If modding to SLI, be careful with the epoxy on the chipset, it was put there intentially by DFI to keep people from modding. I'm not sure what else you can mod on that board?! Besides to SATAII, but that's similar to the SLI mod.
 

· Registered
Joined
·
1,224 Posts
Quote:


Originally Posted by amped

The Ultra-D already has SATAII, it's the regular Lanparty D that doesn't have it.

does it? I dont pay much attention to all the little features, I know I'm using sata150 drives....I honestly didn't think it was SATAII.
Either way, I've heard the difference in performance is tiny, if at all.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top