[Megalomaniac]

Hey, Well I got this pretty neat MoBo with an AMD 2600+ and 512 PC3200 RAM, I have a few questions and a problems....
First with the problem, My Pc3200 RAM says it's only going at 333 instead of 400...what's wrong???and how do I fix it?
Next, With that Processor what should be the BUS Speed and Multiplier?
And finaly off the top of my head...It came with a IDE converter that converts it to SATA, But it doesn't work, It just doesn't see the HD...the hard drive is a Western Digital...

Thanks for any help

 

[ThE_GeNeRaL]

welcome to the forum!!!!!!!!!!

your mobo only supports pc-2700 i think

check out some other peoples clocks at www.cpudatabase.com

 

[blob]

Run memory at 6:6 ratio or select By SPD. I have the same mobo and it DOES support all rams

 

[Megalomaniac]

Quote:

Originally Posted by ThE_GeNeRaL welcome to the forum!!!!!!!!!! your mobo only supports pc-2700 i think check out some other peoples clocks at www.cpudatabase.com

It supports 3200 I had it going at 400 but when I was trying to get it to work when I first builded i messed with some stuff in the bios and when i reset it is random...

 

[ThE_GeNeRaL]

blob which abit mobo is the madest ocer is it his one???

 

[blob]

Yep the NF7-S, but he could have to not as good 1.0/1.1 Version. Megalo, look at your motherboard and see if it is 1.0, 1.1, or 2.0

 

[Megalomaniac]

where would it be? in the manual?

 

[Plague]

if your cpu is 333mhz, your fine. if its 400, raise the memory fsb to 200

 

[Megalomaniac]

Ok, I set my RAM to Turbo and it wouldn't start...so had to set it strait, same with aggressive, and when it's set to SPD it's set to 333MHz