Overclock.net banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1,621 Posts
get a 60mm fan and use foam double sided tape to mount it. you want to have the airflow going downwards. but 70-80*C is way too hot and id guess its a seating issue and id look at redoing the thermal paste on the boards chipset as well as the fan.
 

·
Premium Member
Joined
·
941 Posts
Discussion Starter · #6 ·
1) I have a 800d because it looks awesome, and i'm upgrading MB/CPU when Sandy Bridge comes out in the new year.

2) In my HAF 932 the NB ran a ton cooler because there was a fan pointed on it. So I don't think there is a problem - just need to put a little fan on it. My board is getting sent out for RMA though, so we'll see if the new one runs cooler, but I doubt it will.

I'll take a look at the tape idea, thanks!
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top