[seross69]

Could someone recomend me a 27" 1440p 120Hz monitor all the ones I can find say 60Hz??

 

[dizzyscure1]

I don't think this exist yet? could be wrong though.

 

[Lefik]

120hz 1440p monitors do not exist in a factory configuration, but If you're willing to void the warranty, you can get 120hz pretty easy through OC.

Some monitors that are not entirely guaranteed to hit 120hz, but will get close:
Qnix Q2710
XSTAR DP2710
Shimian QH270

There is also the Overlord x270OC, which is much more likely to hit 120hz, but in my opinion is not worth the extra 500$.

 

[seross69]

Quote:

Originally Posted by Lefik

120hz 1440p monitors do not exist in a factory configuration, but If you're willing to void the warranty, you can get 120hz pretty easy through OC.

Some monitors that are not entirely guaranteed to hit 120hz, but will get close:
Qnix Q2710
XSTAR DP2710
Shimian QH270

There is also the Overlord x270OC, which is much more likely to hit 120hz, but in my opinion is not worth the extra 500$.

Thanks so much for this information can you link me to a over clocking guide on this??

 

[Zero4549]

I would suggest either the Qnix QX2710 or the X-Star DP 2710 (they are both the identical, just different branding). Pick up whichever is cheaper.

As for overclocking them, its very easy. The Qnix/Xstar thread should provide all the answers needed. http://www.overclock.net/t/1384767/official-the-korean-pls-monitor-club-qnix-x-star

 

[Lefik]

Quote:

Originally Posted by seross69

Thanks so much for this information can you link me to a over clocking guide on this??

The thread posted by Zero4549 may be the best source, but I am no expert on monitor overclocking. I found it very simple to OC my monitor using the slider in EVGA Precision X, and then checking for artifacts while playing a round of Battlefield.

 

[seross69]

Are these 2 monitors from monoprice any good

27" IPS-Glass Panel Pro LED Monitor WQHD 2560x1440- 440cd/m2 - HDMI® 1.4 / DVI / VGA / DisplayPort 1.2 w/Built in Speakers $474.17
27" IPS-ZERO-G Slim Monitor WQHD 2560x1440 - Dual Link DVI, VGA $390.60

 

[Zero4549]

Unless they made some recent changes to EVGA Precision, it can't overclock panels, only gpus.
Quote:

Originally Posted by seross69

Are these 2 monitors from monoprice any good

27" IPS-Glass Panel Pro LED Monitor WQHD 2560x1440- 440cd/m2 - HDMI® 1.4 / DVI / VGA / DisplayPort 1.2 w/Built in Speakers $474.17
27" IPS-ZERO-G Slim Monitor WQHD 2560x1440 - Dual Link DVI, VGA $390.60

They are fine panels, but aren't known for overclocking particularly well.

The Qnix/Xstar, Overlord, and a few ultrasharps are your best bet for overclocking.

I wouldn't bother with the overlord, as it's expensive and still "just" a korean panel.

The ultrasharps are nice but very expensive and no guarantee to overclock at all, only get it if you are willing to use it at 60fps and then MAYBE try to overclock it as a bonus.

 

[Lefik]

Quote:

Originally Posted by seross69

Are these 2 monitors from monoprice any good

27" IPS-Glass Panel Pro LED Monitor WQHD 2560x1440- 440cd/m2 - HDMI® 1.4 / DVI / VGA / DisplayPort 1.2 w/Built in Speakers $474.17
27" IPS-ZERO-G Slim Monitor WQHD 2560x1440 - Dual Link DVI, VGA $390.60

Because you can get similar panels off ebay for 250-400$, usually 300$, I wouldn't get one of those.

 

[seross69]

Quote:

Originally Posted by Zero4549

Unless they made some recent changes to EVGA Precision, it can't overclock panels, only gpus.
They are fine panels, but aren't known for overclocking particularly well.

The Qnix/Xstar, Overlord, and a few ultrasharps are your best bet for overclocking.

I wouldn't bother with the overlord, as it's expensive and still "just" a korean panel.

The ultrasharps are nice but very expensive and no guarantee to overclock at all, only get it if you are willing to use it at 60fps and then MAYBE try to overclock it as a bonus.

Quote:

Originally Posted by Lefik

Because you can get similar panels off ebay for 250-400$, usually 300$, I wouldn't get one of those.

Thanks so much for your help...