Overclock.net banner

Need help OVERCLOCKING a P4m900 board

1408 Views 1 Reply 2 Participants Last post by  10acjed
I have a Biostar P4M900 board with a 430 (1.8) celeron. Want to crank it up to 2.2-2.4 or so. Anybody here know how to tune a biostar P4M900-M7 FE board? P4M900, 430 celeron, 1 stick 2048 -667 Patroit ram, 575 watt Logisys psu, coolermaster cpu fan, old E-machine's case, New parts 1 week old. Runs 25c-26c (not very warm). I thank you for any help.
1 - 2 of 2 Posts
I dont think you will find much in the lines of bios options on that board.. Go into bios and see if you can adjust the fsb, or freq anywhere.

You will probably have to find some sort of 3rd party program for cpu overclocking. http://www.cpuid.com/clockgen.php clockgen will work, although I would not push it too far, and I wouldnt have it run at start up with the OC setting.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.