[The Specialist]

Hi all,

I clock a Sempron 2400+ ( 166 x 10 ) on a ABit NF7-S rev.2.0 and some Samsung 2x 512MB rams!

I clocked it up to 236mhz and can´t go further! Am I maxed out?

The memory can run 260mhz @ CL3-4-4-8 ( I tested with higher divider )

Thanks for any help!

 

[gonX]

700 MHz is quite a bit of a increase, so I'd say yeah.

 

[The Specialist]

hmm... OK!

I run a few SuperPI 1M and it doesn´t any efect if I run CL3-4-4-8 or CL3-3-3-5 what the heck is this? I´m still at ~48s in 1M ...

 

[The Duke]

Here is a possibility...
If you have a good HSF to keep it cool, 55c max @ full load.
Did you try about 1.8-1.85 with a 200MHz FSB?

That should be a Thred "B" and may be able to do it!

BTW, thats still a very good OC for that CPU you have going now!

If you want to squeeze a bungh more out of the very fine OCing MB you have, look into a 2500+ or 2600+ Barton, either a DT of M but preferably a "M" because the mobils can usually do 2400MHz or more. But you will need the cooling to do it!

 

[The Specialist]

There is some Cooler MAster on it!
The multi is looked so I can´t go for 200mhz FSB!
I have it at 236 x 10 = 2360MHz!
The chips on the mems are TCC5´s
Its running @ 1.8 VCore in SuperPI 32M I got 43C max! Thought its good!