Overclock.net banner

1 - 3 of 3 Posts

·
Registered
Joined
·
148 Posts
Discussion Starter · #1 ·
After installing and spending the last 20 minutes trying to figure out sketchup, I figured I'd make a thread. I am wanting something extremely simple and rough.

I need a sketchup of a black box with dimensions 15"W x 8"H x 20"D and any ATX mobo on the top (horizonal) with the I/O along the 15" side. If its not to much trouble please put one of these mounted horizontally and next to the mobo.

Thanks!
 

·
Registered
Joined
·
524 Posts
The box is easy enough to do.
1. Just use the rectangle tool and draw a 15" by 20" rectangle.
2. Use the pull tool to pull it up 8".
3. Use the offset tool on an 20" by 8" side and choose a thickness for the material. 2mm-4mm is common for cases.
4. Use the push tool on the rectangle you just created in 3 and push it in 15" minus w/e thickness you choose. Ie, if you choose 4mm material thickness, push it 14.84" (15" - 0.157" (4mm converted to inches").
5. Mobo wise, they're actually very time consuming to make, but you can grab one off here
http://scc.jezmckean.com/home
You can also insert the t-virus yourself wherever you want using the move tool.

All this is very basic and shouldn't take more than 5 minutes. You can go through the basic tutorial video's as well if you wanna learn more
http://sketchup.google.com/training/...ew_to_gsu.html
 
1 - 3 of 3 Posts
Top