Overclock.net banner

Need tubing diameter visual comparison

637 views 6 replies 3 participants last post by  Infrabasse 
#1 ·
Hi guys,

I'm trying to decide between 3/8" and 1/2" ID tubing for my system, but with the sheer variety of tubing available, I'm never quite sure at what I look at on system pictures. I've seen huge tubing in the past and guess that was 5/8". Some tiny one too, probably 8mm. But the line between 3/8 and 1/2 is still a little blurry for me.
If you could point me to system pictures specifying the ID of the setup, that'd help me picture the difference better
 
See less See more
1
#4 ·
And this is my rig with 1/2" ID tubings. Granted.. i do have thick tubings since these have 3/4" OD.



And here is pic of my other rig with regular 1/2" ID and 5/8" OD tubing

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top