Overclock.net banner

New guy, new rig!

218 Views 4 Replies 3 Participants Last post by  explict
Whats up,
I am new to this site, O/Cing and building computers in general.
I've learned alot in a short amount of time.

Here are my stats:

Antec 900
Q6600 (G0)
AC Freezer 7 Pro
OCZ HPC Reaper Ram 4GB
EVGA 9800GX2
Corsair 620W
LG Blu-Ray writer
Seagate 500GB 7200.11
Seagate 320GB 7200.10

I have my Q6600 running at 3.2ghz right now with the following settings:
Bus: 356
Multi: 9
VCore: 1.35
PCI: 100
Everything else is auto..

I've basically come here to learn how to make sure my O/C is safe and to optimize it. And ofcourse learn how to make a bigger, better overclock!

My Temps Are:
C1: 36
C2: 33
C3: 28
C4: 28
GPU1: 65
GPU2: 64

Any questions or comments lemme know!
See less See more
1 - 5 of 5 Posts
Thats a nice starting OC, but you should be able to push it to at least 3.4

also, when posting temperatures, tell us your temperatures under load, as the idle temperatures dont tell us much.
See less See more
Ok, so how should I put my cpu under load to get these temps?
Run prime95?
Prime95 or Orthos.

Welcome to OCN btw, nice rig and its cool to see someone with a BLURAY drive here
See less See more
Yeah, I have just done that! I have a thread about it over in the intel section!!

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.