[doat]

I changed my water block and jumped my psu to do a leak test then i put my video card in because i was done with everything and the green light comes on on the card and the fan spins but monitor says no input signal. What do i do?

 

[Platinum]

Try Clearing the CMOS first?

 

[doat]

tried that and still says no input signal

 

[nathris]

Check to see if anything is shorting out. I'm having a similar issue I think. I still haven't isolated the problem but I believe I have an active wire touching the case somewhere, as running caseless fixed it for me.

 

[Juggalo23451]

take off w/c black see if there is a short

 

[Darkknight512]

Try the other port, my video card only outputs to one of the DVI ports at boot.

 

[doat]

Juggalo helped me fix it, i needed to put a plastic washer between the motherboard and the block on the screws.

Everyone has been repped, thank you all for your help.