Overclock.net banner
1 - 1 of 1 Posts

· Registered
2 Posts
Discussion Starter · #1 ·
Hi All

Concerning the RPM reporting of the pump on the Antec 620, Can someone please confirm if the RPM (of the pump) is being reported via their CPU_FAN header, on my Gigabyte mobo it has stopped showing up and dispalys 0 only, when I first fitted it it was posting an RPM.

I have disabled All fan control in Bios and I am using SpeedFan to control the 3 other case fans. I don't want to change the pump speed but I want to ensure that it is actually working at full throttle, the Antec stock fan is always at full but again there is no reading as it is controlled by the pump circuit.

Any thoughts.

Thanks in advance

My BAD, meant to post this on the Antec forum
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.