Overclock.net banner

NooB to OC: AMD Sempron 3100+

3083 Views 21 Replies 11 Participants Last post by  rick5446
Ok, I need mjor help, I cannot find data on my mobo to OC, my bios has no options to cahnge fsb or memory settings and i am at a loss of what to do, from what i read this 3100 can be clocked from 1.8 to2.5 easily. What do i do? PLEASE HELP
1 - 2 of 2 Posts

· Registered
Joined
·
36 Posts
Press delete at startup. That is what most mobos use. Look for anything about FSB frequency, vCore voltage, ram voltage, etc. I believe that mobo is not very good for oc'ing though. Not sure...
 

· Registered
Joined
·
36 Posts
There is many good faq's on this out there. You should definitely read these faq's or you probably will fry something. I am pretty noob too, but the reason I asked what your BIOS has in it is that is a pretty good indication of whether or not you can OC with this mobo. That is where you should start. No sense reading faq's if you can't adjust your fsb(or HTT)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top