Overclock.net banner

OC'ing Corsair XMS , help !!

933 14
My OCed comp at the sys Spec. below
this is my DDR SDRAM
http://www.newegg.com/Product/Produ...N82E16820145500
I think it use Promos chip

I've OCed like this: FSB:240MHz
1/ Didn't change the bandwidth (DDR/FSB:5/6) :--->srill run 200MHz
2/OCed the timming of my DDR SDRAM in DFI nF3 UT BIOS like this :
CPC: 1T
tCL : 2.0
tRCD: 3
tRAS: 7
tRP : 3
tRC : 10
tRFC: 12
tRRD: 2
tWR: 2
tWTR: 1
tRTW: 1
tREF: 3120
tWCL: 1

everything elses of timming I set at Auto (no change). Vdimm at stock
this passed the OCCT Stability test,...

Is my RAM timming OK ??
I wonder if I can OC the bandwidth more from 200 MHz ??
1 - 2 of 2 Posts

· Registered
Joined
·
14 Posts
i have the same model of ram but in 2gb version i overclock very easy
__________________________________________*
rigg* ASUS A8N-SLI MB/AMD X2 3800; WD 250GB SATA2; ASUS DVD DRIVE DUAL LAYER; 2GB DDR 400 CORSAIR CAS(2.5-3-3-6)xms version; eVGA GeForce 6800 GS 256MB CLOCK(1.1GHZ)
NZXT LEXA W 500WATT PSU;best case ever
 

· Registered
Joined
·
14 Posts
The corsair xms series was built to overclock the operating frequency with lower CAS LANTECY
__________________________________________________ ___________*

I know because i have the corsair xms series 1*2gb overclocked it at
cas(2.5-3-3-6) and staying at default latency its operating frequency is 240mhz it is possible.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top