Overclock.net banner

OCing X3 8650...

500 Views 3 Replies 3 Participants Last post by  amder
Well Ive gotten my cpu at 2.7Ghz with 1.450 volts and the fsb at 237. The Ht speed is at 1.8. But every time I raise the fsb the mobo resets? Any help?
1 - 1 of 1 Posts

· Premium Member
2,593 Posts
It looks like your motherboard has hit a wall. Raise the NB voltage, and see if that gives you any headroom.

One thing to try is to lower the CPU multi a few notches, and start pumping the FSB to see where your board tops off, eliminating the processor from the equation. All while tweaking the HTT multi and NB voltage.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.