Overclock.net banner

8121 - 8135 of 8135 Posts

·
Registered
Joined
·
680 Posts
centvalny that's some awesome results. I just recently got that ram kit and also have a ram cooler on there with 2 fans with 4 pin (I know, all professional right)

What voltage would you suggest for an everyday setup, gaming, internet, etc? Also, what kind of timings would you expect for that voltage. Is CR 1T 4133mhz with the lowest timings the way to go?
 

·
9 Cans of Ravioli
Joined
·
20,820 Posts
centvalny that's some awesome results. I just recently got that ram kit and also have a ram cooler on there with 2 fans with 4 pin (I know, all professional right)

What voltage would you suggest for an everyday setup, gaming, internet, etc? Also, what kind of timings would you expect for that voltage. Is CR 1T 4133mhz with the lowest timings the way to go?

A lot of it depends on your motherboard and silicon lottery. Just take the time and poke around in the DDR4 specific thread here on OCN.

Stay below 1.5v vDIMM and 1.3v for SA/VCCIO for 24/7. You shouldn't need to run SA/VCCIO that high anyway though.

I've got the CL19 Trident Z 4133 kit and it won't boot at 1T above ~3200. I'm at 4133 16-18-18-34 2T 1.475v vDIMM, 1.2 VCCIO/SA.

Play with subs and tertiaries too or you're wasting your time.
 

·
Registered
Joined
·
817 Posts
centvalny that's some awesome results. I just recently got that ram kit and also have a ram cooler on there with 2 fans with 4 pin (I know, all professional right)

What voltage would you suggest for an everyday setup, gaming, internet, etc? Also, what kind of timings would you expect for that voltage. Is CR 1T 4133mhz with the lowest timings the way to go?
Good choice of ram Neo :)
Run with XMP should be ideal for daily tasks, and you can try up strap to 4266 or 4300 with te same XMP settings.
 

·
Registered
Joined
·
8 Posts
Hello, I got ram corsair ddr 4 4800 mhz, my computer is a 9900k and a Msi Z390 godlike motherboard.



the maximum I've got stable is 4443mhz with profile xmp and changing the timmings .

Stock 2t 18 - 24-24 46 (stable 4300 mhz )
stable 2t 19-24-24-46 (stable 4443mhz)
Voltage 1.5 (xmp)



What parameters do you advise me to change?




Apologies for my English.
 

·
Overclock the World
Joined
·
2,226 Posts
It's nothing special, and a quite old picture
But maybe someone likes it :)
A0 PCB but solid ICs
 

Attachments

8121 - 8135 of 8135 Posts
Top