[Disturbed117]

Banner Created by odin2free

Spoiler: Old Banner.

Cancel

Please use a recent version of MaxxMem Preview. (Download Page) and CPU-Z
Download broke? Download here. Link
Here is a great post that explains the effect of a CPU NB overclock and RAM Speed & Timings.

INSTRUCTIONS:

You must do this or your submission may not be added:

Please post a screenshot of your MaxxMem results and the SPD tab of CPU-z to be added to the list.

If your memory brand is not the same as your sig rig, please post that too. It would be extremely helpful if you post a link to your exact memory.

odin2free is able to update the spreadsheet. If you see him update it, you may want to thank him properly as he deserves some recognition for all the work he does!

Contacting Us.

Note: If for some reason your score has not been added and or updated, Please contact one of the members listed below as we can rectify it fairly quick and are the most active with updating the spreadsheet.

Disturbed117 odin2free

https://docs.google.com/spreadsheet/pub?key=0AqVpPC3LIyz6dERrZk9vY0dhcFVlb1hGVU92Z1QtaGc&output=html&widget=true

Code for your signature tag:

[URL=http://www.overclock.net/t/1085742/amd-maxxmem-results-rankings/0_30]AMD MaxxMemm Rankings[/URL]

Spoiler: Original Post with robbo2's results.

Original messsage:

I want to give a special thanks to robbo2 for creating this thread for us AMD users to show our MaxxMem results in. He deserves all the credit for this topic. I just took the thread over to manage the spreadsheets and help him get the most out of his idea. Here is his original post:

Quote:

I haven't seen a thread just for AMD results so I thought I might start one. Just post them up so we can all see where our systems compare to similar systems. I'll start with mine, it's corsair vengance ram rated at 8-8-8-24 1600 and it really doesn't like it when I try and move the timings

http://imgur.com/zippM

 

[daito]

this is the best result i got , kingston hyperX rated at 9-9-9-24 , 1600, i tried a lot of combinations but this one gave me the best results (8-9-8-24) @1600

 

[robbo2]

Looks like I am using an incredibly old version. Nice results considering your NB is at stock clocks.

 

[daito]

Quote:

Originally Posted by robbo2;14490631
Looks like I am using an incredibly old version. Nice results considering your NB is at stock clocks.

loool, and i took my screenshot like a year ago

i never got into OCing my NB, got bored of testing all the time

can't wait for more people to post their results

 

[haziqk10]

Here is mine. I am using Corsair Dominator at 7-7-6-17-22-1t @ 1664.
I am using Window 7 32 bit though.

 

[fishhawk]

Ok i,ll bite.

 

[robbo2]

Nice scores

 

[huhh]

Here's mine,

 

[iamwardicus]

Quote:

Originally Posted by daito;14490533
this is the best result i got , kingston hyperX rated at 9-9-9-24 , 1600, i tried a lot of combinations but this one gave me the best results (8-9-8-24) @1600

Daito - Increase your CPU-NB multi to x12 or x13 depending on how you overclocked your system - try to get it to 2600-3000ish and your numbers should go up a good amount

I ran mine, but because 8gb on my board will only run in 2T command rate and I cannot force 1T on this motherboard/BIOS revision... I guess I'm kinda stuck

 

[Atomfix]

Here's my scores, just to rub it in!

Ignore my PI Score, something went wrong with it and it used 1% of my CPU.

 

[xd_1771]

Increased northbridge clock will significantly up your results.
See the sticky: Northbridge speed and RAM timing significance on AMD platforms

 

[daito]

Quote:

Originally Posted by iamwardicus;14494969
Daito - Increase your CPU-NB multi to x12 or x13 depending on how you overclocked your system - try to get it to 2600-3000ish and your numbers should go up a good amount

I ran mine, but because 8gb on my board will only run in 2T command rate and I cannot force 1T on this motherboard/BIOS revision... I guess I'm kinda stuck

i OCed a bit when i got my system up and running, but then i lost the excitement behind OCing

guess i'll get back into it soon though

Quote:

Originally Posted by xd_1771;14499331
Increased northbridge clock will significantly up your results.
See the sticky: Northbridge speed and RAM timing significance on AMD platforms

thanks for the like, i was gonna wait till i upgrade to CHV but i think that'll take some time , so i'll try OCing this rig one more time

 

[wumpus]

this bench is not very good for judging real world performance fyi.

its actually quite terrible.

 

[96shox]

AMD sucks in this department. I have a question though, Will changing command rate to 1t help? stability issues?
2600Mhz NB
800Mhz Kingston HyperX

 

[Atomfix]

Yes, Changeing it to 1T will help. and your CPU should be able to hit 2800MHz on the Northbridge easy

 

[96shox]

Quote:

Originally Posted by Atomfix;14504678
Yes, Changeing it to 1T will help. and your CPU should be able to hit 2800MHz on the Northbridge easy

How about I just go for 3300 like you

 

[Atomfix]

Quote:

Originally Posted by 96shox;14504990
How about I just go for 3300 like you

XD Trying to hit 3300MHz Northbridge on a Deneb might be a little hard, unless you put some suicidal volts in.

Deneb's IMC's are not as good as Thuban's IMC's

 

[96shox]

Changed from 2t to 1t and had minimal to zero results. Had to run MaxxMem a 2nd time with all programs closed to see a minimal increase. Will go for 2800+Mhz NB later.

 

[Atomfix]

Quote:

Originally Posted by 96shox;14505125
Changed from 2t to 1t and had minimal to zero results. Had to run MaxxMem a 2nd time with all programs closed to see a minimal increase. Will go for 2800+Mhz NB later.

You have much better memory Latency!, the lower it is, the better

 

[96shox]

So I moved on to NB increase from 2600 to 2800. I BSOD @ 2800 so I am working on finding stable Voltage

1) Any benefit to increasing NB Voltage even more after finding a stable setting? (maybe more stable)
2) Something strange happened after my BSOD, all my saved logins on Firefox erased. Is this normal?
3) Im going to push for 3000Mhz NB (after I find a stable 2800 setting)...any tips?