Overclock.net banner

1 - 20 of 6929 Posts

·
Premium Member
Joined
·
2,592 Posts
Discussion Starter #1

·
Premium Member
Joined
·
2,592 Posts
Discussion Starter #2
I was wondering if anyone else has a "Disk" error in event viewer after installing the Intel USB 3.0 drivers then once restarted plugged in a USB 3.0 external data drive.

Seems to fire one error after plugging it in, then im not getting anymore errors from the disk, Hopefully its just the Intel USB 3.0 drivers reconfigureing the drive for first time use or something.

Update:
I just ran ATTO three times on the external USB 3.0 data drive hooked up to the Intel USB 3.0 port and got no "Disk" errors in event viewer so Im good, It's what I thought it was a first time driver initialization error.
smile.gif
 

·
Registered
Joined
·
19 Posts
no complaints from me so far... just built new rig on this board yesterday. Seems to be working great and looks sweet!
 

·
Registered
Joined
·
94 Posts
Mine is sitting in my Haf X, with my new Corsair H100 hanging, ready for my 3770k.... now where are you Intel.... Hurry up!

450
 

·
Premium Member
Joined
·
8,423 Posts

·
Registered
Joined
·
14 Posts
Hi, this is my first post, but I had the same issue after upgrading from a P67A GIGABYTE board. Ended up installing a fresh windows7 system on a new drive and all was ok. Pretty sure it would have been a driver issue with the new USB 3.0, but all is good now.

On a side note, I've got a 2600k installed currently on my z77 sabertooth, does anyone know what type of ivy bridge CPU would be a better
 

·
Premium Member
Joined
·
2,592 Posts
Discussion Starter #9
Quote:
Originally Posted by Starlo77 View Post

Hi, this is my first post, but I had the same issue after upgrading from a P67A GIGABYTE board. Ended up installing a fresh windows7 system on a new drive and all was ok. Pretty sure it would have been a driver issue with the new USB 3.0, but all is good now.
On a side note, I've got a 2600k installed currently on my z77 sabertooth, does anyone know what type of ivy bridge CPU would be a better
So you too got a "Disk" error in event viewer after installing the Intel USB 3.0 driver ?

P.S: I just ran ATTO three times on the external USB 3.0 data drive hooked up to the Intel USB 3.0 port and got no "Disk" errors in event viewer so Im good, It's what I thought it was a first time driver initialization error.
smile.gif
 

·
Registered
Joined
·
237 Posts
I love mine.

Some current issues:
Sometimes case fans will spin at the minimum set RPMs in the user-defined curve until I open the tool and click apply again. For some reason they default to 60% if 60% is the minimum I have set instead of spinning at 70% based on the temp sensors chosen for example. I'd imagine a BIOS change can rectify this. I've contacted ASUS.
My SATA6G and USB3 sensors run pretty hot, up to 50-55C at times (during gaming). I believe this is due to my GPU. I wonder what a safe operating temp for those chips is? 75C is a pretty standard min for chips like that so that's what I'm assuming.

Everything else is fantastic, and I have no other issues. Great board!
 

·
Premium Member
Joined
·
2,592 Posts
Discussion Starter #13
Yeah indeed thats nice, and a 680 aswell, sweet setup
thumb.gif
 

·
Premium Member
Joined
·
2,592 Posts
Discussion Starter #15
I cant hear the two 35mm fans at all, very silent

Yeah im pretty sure the Fan Xpert software is on the included disc, I dont use it so i really didnt check
 

·
Premium Member
Joined
·
20,367 Posts
Where does the second fan go? I can see the first one just below the cpu.
 

·
Premium Member
Joined
·
2,592 Posts
Discussion Starter #17
Quote:
Originally Posted by Robilar View Post

Where does the second fan go? I can see the first one just below the cpu.
Here ya go
smile.gif


366
 
  • Rep+
Reactions: Robilar
1 - 20 of 6929 Posts
Top