[Official] Corsair Vengeance C70 Gaming Case Owner Club
My Case - Gunmetal Black
|Dimension:||501mm (H) x 232mm (W) x 533mm (L)|
|MB Support:||ATX, mATX|
|Drive Bays:||Three (3x) 5.25" bays, and Six (6x) 3.5"/2.5" hard drive bays|
|Cooling:||Three (3x) 120mm fans|
|Front I/O:||(x2) USB 3.0, (x1) Headphone, (x1) MIC, Power, and Reset Switches|
|Power Supply:||ATX (not included)|
wevsspot (post #2037 - #2041 & #2043)
Can I fit Extended ATX (EATX) motherboard in Corsair Vengeance C70 casing?
Yes you can & without any mod to the case. Please pay attention to the size though. The biggest E-ATX so far that I know will fit without modification & without blocking the rubber grommet is 27.2 cm.
ASUS Rampage IV Extreme - 12 inch x 10.7 inch ( 30.5 cm x 27.2 cm )
ASUS Maximus V Formula - 12 inch x 10.1 inch ( 30.5 cm x 25.7 cm )
EVGA P67 FTW LGA1155 - 12 inch x 10.3 inch ( 30.5 cm x 26.2 cm )
Side Window Panel Mod
- The size of the original window is (approximate) 33.5cm X 31.5cm on the inside.
- beta bull3t wrote a short tutorial on how to prepare a replacement window using acrylic. The size is 348mm x 328mm x 5mm. You will need some (e.g. rubber) washers for the window to fit nicely. The case did come with extra rubber washers. You also can go with 6mm or 7mm if you want thicker window.
- Can't make custom window yourself or don't have access to appropriate tools? Please PM sebar for custom made window.
|360 mm Radiator (little to no modification required)|