Overclock.net banner
1 - 20 of 21427 Posts

·
jonnyblaze
Joined
·
4,328 Posts
Discussion Starter · #1 ·
WELCOME TO THE CLASSIFIED OWNER'S CLUB

NOW FEATURING THE EVGA 980 TI CLASSIFIED K|NGP|N EDITION!


980 TI K|NGP|N CLASSIFIED TOOLS AND BIOS SECTION

COMING SOON!!!!!

980 TI CLASSIFIED TOOLS AND BIOS SECTION


Clasified Software Voltage Tool -

Classified_v2.1.2.zip 852k .zip file


OC Bios -

GTX980Ti_ClassyOC.zip 152k .zip file


EVBOT Firmware -

vga4p56.zip 848k .zip file


Flash Tool -

CNVFLASH.zip 1696k .zip file


(Flash tool. Please use this nvflash only in windows 64/32(depending on OS)(shift + right click in folder window after unpack and select open command window here and type nvflash 980kp_xoc6C.rom then y then YES). Always wise to uninstall your cards driver fist before flashing.)

980 K|INGPIN CLASSIFIED TOOLS AND BIOS SECTION

EVGA 980 CLASSIFIED K|NGP|N EDITION TOOLS

XOC BIOS POSTED BY K|NGP|N

kp980x.zip 137k .zip file


EVBOT FIRMWARE

980p53.zip 846k .zip file

(instructions are at the bottom of this page for flashing your evbot)

NVFlash for 980 K|NGP|N Classified

NVFLASH.zip 755k .zip file


Classy Software Voltage Tool (new version compatible with 980 kpe)

Classified_v2.1.0.zip 851k .zip file

980 CLASSIFIED TOOLS AND BIOS SECTION
980 Classified Tools and Bios's

New Classy Voltage Tool for 980 Classified -

Classified_v2.0.5.0.zip 845k .zip file


980 Classified XOC bios -

ClassyX.zip 137k .zip file


980 Classified EVBOT Software -

EVBot_P37.zip 545k .zip file

EVGA 780 TI KINGPIN CLASSIFIED SECTION -

EVGA 780 TI Classified Kingpin Edition Production Card Photos!







NEW & EXCITING FEATURES FOUND ON THE 780 TI CLASSIFIED KINGPIN EDITION!!!!!

The Kingpin Edition Features 4 new switches found near the PCIE Bracket and near the topside of the card.

There are 4 additional switches on backside of card, the functions are as follows:

Switches near card topside

1. Disable GPU power protection (if toggled to OFF position)

2. Disable Memory power protection (if toggled to OFF position)

Switches near PCI-E bracket

1. Increase GPU voltage +25mV

2. Increase GPU voltage another +25mV

(If both switches enabled it will increase +50mV, default position is one switch enabled)


Engineered to Overclock

The ultimate GeForce GTX 780 Ti has arrived. Introducing the EVGA GeForce GTX 780 Ti Classified K|NGP|N Edition. This card is the final answer in the search for the greatest overclocking graphics card on the planet.

This card does not hold back, with up to 450W of dedicated GPU power, enhanced PLL circuitry, improved GPU power plane, 10CM fans, included backplate, preinstalled dedicated PWM baseplate, voltage regulation enhancements and more. As you can see, there is a reason why this card is named after the world's Top Overclocker.

Extreme overclockers Vince "K|NGP|N" Lucido and Illya "TiN" Tsemenko demand the best when it comes to performance and overclocking, so they set out to co-design this product along with EVGA, and geared it for the ultimate overclocker.

"In order to break world records these days you need some serious hardware," said Vince "K|NGP|N" Lucido. "This card was engineered to serve one purpose… be the world's best overclocking graphics card. Expect GPU clockspeeds at over 1.85GHz with extreme cooling."

"With the EVGA GeForce GTX 780 Ti Classified K|NGP|N Edition graphics card, we focused on the basic demands that are needed when doing extreme overclocking," said Illya "TiN" Tsemenko. "Capable hardware design and heavy power delivery capacity is key for performance dominance and the ultimate gaming experience. So too is a unique power convertor able to provide over 450W of clean voltage for every kind of overclocking!"

HERE IS AN EXCLUSIVE PHOTO OF THE VRM SECTION OF THE KINGPIN EDITION CARD POSTED FOR US BY JACOB.



KINGPIN EDITION OVERCLOCK GUIDE!

OC_Guide.pdf 430k .pdf file


KINGPIN EDITION EVBOT TOOLS AND BIOS

Kingpin Edition Bios, Custom EVBOT Firmware and nvflash
3888KPTI.zip 131k .zip file

(3888KPTI.zip bios is the latest revision with looser timings for the memory. It also fixes a bug with evbot not being able to flash from card and also a bug with voltage tuning.)

KINGPINEDITIONBIOS.zip 131k .zip file


nvflash.zip 446k .zip file


CWSDPMI.zip 13k .zip file


Place nvflash, cwsdpmi, and bios image to bootable thumb drive and flash this bios in DOS to the LN2 switch on the card, be sure to power off once after flash and let the card re-initialize.
Flash Command:
nvflash -4 -5 -6 XOCKPti.com
When promted type in YES or y accordingly.
Kingpin Bios Disclaimer - This bios will ONLY work on KPE card, so don't bork your regular classified by trying to flash them to it . The cards are very different. Don't forget to use really good aircooling on the pwm plate when pushing it over air/water cooling clocks and volts, it will get hot. Enjoy the card, a lot of testing and work went into it

Kingpin Edition EVBOT Firmware (also works with the 780 ti classy)

Plug evbot into card turn on and flash this firmware in windows, follow any instructions given.
(please see below evbot flash instructions for gpu use only)

780i31.zip 212k .zip file

BEST WAY TO GET THE MOST OUT OF YOUR KINGPIN EDITION. LINKS TO TEK-9 FAT AND SLIM POTS.
CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), quality = 85

http://kingpincooling.com/tek-9-fat-6-0-gpu-unit/

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), quality = 85

http://kingpincooling.com/tek-9-slim-rev-7/

https://docs.google.com/spreadsheet/pub?key=0AuE2IRjLOeFwdFNZZHJDeWVKQi1zdkU5dGFNRWQ1SVE&output=html&widget=true

To get added to the owner's list above please post a gpuz validation link in this thread and I will update the list. Thank you.
OFFICIAL EVGA CLASSIFIED OWNER'S CLUB SIGNATURE

Code:

Code:
[CENTER]:h34r-smi [URL=http://www.overclock.net/t/1411500/official-evga-classified-owners-club][B][SIZE=3]EVGA CLASSIFIED & K|NGP|N OWNER'S CLUB[/SIZE][/B][/URL] :h34r-smi[/CENTER]
EVGA 780 TI CLASSIFIED SECTION

http://www.evga.com/Products/Product.aspx?pn=03G-P4-2888-KR

EVGA 780 TI CLASSIFIED TOOLS AND BIOS SECTION

NEW UPDATED CLASSIFIED SOFTWARE VOLTAGE CONTROLLER WITH PWM CONTROL!
(New version allows higher voltage and pwm control. This is latest version.)

Classified_v2.0.4.3.zip 203k .zip file



EVGA 780 TI CLASSIFIED BIOS'S

EVGA 780 Ti Classified skyn3t rev.1

skyn3trev.1bios.zip 271k .zip file


EVGA 780 Ti Classified ftw2002 bios

FTW_2002.zip 134k .zip file


EVGA 780 Ti Classified EVGA bios

Xti.zip 134k .zip file


EVGA 780 Ti Classified skyn3t bios rev.2 (evga official fix bios rev.)

skyn3trev.2bios.zip 271k .zip file


WATER BLOCKS AVAILABLE FOR CLASSIFIED VERSIONS!

EVGA HYDROCOPPER WATER BLOCK - FITS THE 780 CLASSIFIED AND 780 TI CLASSIFIED.



http://www.evga.com/Products/Product.aspx?pn=400-CU-G780-B2

EK CLASSY WATER BLOCKS IN PLEXI AND ACETAL VERSIONS. EK WILL HAVE AN UPDATED BACKPLATE 2.0 FOR KINGPIN EDITION. EK CLASSY BLOCKS FIT THE 780 CLASSIFIED, 780 TI CLASSIFIED AND KINGPIN EDITION.

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), default quality
http://www.ekwb.com/shop/blocks/vga-blocks/fc-geforce/geforce-titan-series/ek-fc780-gtx-classy-nickel.html

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), default quality
http://www.ekwb.com/shop/blocks/vga-blocks/fc-geforce/geforce-titan-series/ek-fc780-gtx-classy-acetal-nickel.html

EVGA 780 CLASSIFIED SECTION
GTX 780 Classified Bios's (Stock bios's from first batch of cards) -

Stockbios.zip 131k .zip file


LN2.zip 131k .zip file


skyn3t helped us out a lot and made custom bios's for us Classified Owner's. I flashed and tested them myself. Big thanks to skyn3t!!!!!!

EVGA 780 Classified skyn3t rev.1 bios

sky-LN2.zip 132k .zip file


EVGA 780 Classified skyn3t rev.2 bios

sky-classy-vBios-rev2.zip 265k .zip file


EVGA 780 Classified skyn3t rev.3 bios

vBios-v380.80.21.01.80-LN2.zip 131k .zip file


Revision 4 skyn3t bios 780 Classified "NO Ti"

skyn3t-Classy-vBios-rev4.zip 135k .zip file

[*] skyn3t-Classy-vBios-rev4
[*] Version 80.80.31.01.80 B1 chip
[*] Base core clock 1110.5 Mhz
[*] Boost disable
[*] 3d voltage adjustable
[*] 1.212v Unlocked
[*] Fan Idle 20%
[*] Fan bumped to 100%
[*] Default power target 100% 600w by 150% slide 900w

best
skyn3t

[Official] EVGA Classified Owner's Club

GTX 780, 780 TI, 770, 680 Classified Software Overvoltage tool -

(The overvoltage tool allows 780 Classified's 1.50v and 780 TI Classified's up to about 1.6v)

Classified_v2.0.4.3.zip 203k .zip file


EVGA EVBOT Manual & GPU Flash Tool & Instructions

Note-EVGA updated EVBOT firmware to p27. I have included both files below. Either one will work with my instructions.

EVBot_P27.zip 541k .zip file


How to flash EVBOT for GPU use only for 680 & 780 Classified's -

Windows Installation

•Download the .zip file below:

EVBot_P26.zip 541k .zip file


•Connect the EVBot cable to the MB port located on the EVBot device.
•Connect the other end of the EVBot cable to your graphics card.
•Extract contents of above .zip file and run EVBotFlashTool.exe
•Select the bundled .hex file for flashing.
•Hold down the EVBot POWER button for 7 seconds until you see the EVBot screen display FLASH MODE.
•Click OK in EVBot Flash Tool to being the flashing process.
•After flash is complete, unplug EVBot, then plug it back in to any EVBot port.
Warning:
**Do not restart or interrupt your PC while the flash is ongoing

EVBOT Manual -

EVBOT Manual.zip 1379k .zip file

NV Flash Tools for Windows -

nvflash_windows_5.134.0.1.zip 403k .zip file


Instructions for flashing bios -

Unpack the zip file above and the bios you want into a folder on you c drive called classified. Then while in that folder right click in an empty space and select "open command window here" then procedd with the unlock command below and the rest of the commands as needed.

nvflash --protectoff

nvflash -4 -5 -6 biosname.rom

You might have to hit "y" twice. Once it says completed reboot. You might also have to reinstall drivers depending on bios.

Flashing with 2 cards installed -

nvflash -i0 -4 -5 -6 biosname.rom - (This is for card #1)

nvflash -i1 -4 -5 -6 biosname.rom - (This is for card #2)

Made Official by ENTERPRISE 27.7.13
 

Attachments

·
jonnyblaze
Joined
·
4,328 Posts
Discussion Starter · #3 ·
I can't edit my posts anymore. I someone could make a modded bios that would be amazing. I will upload both bios's here. I am still not artifacting or crashing at 1306mhz 7400mhz so I know I could go alot higher with a custom bios.

LN2.zip 131k .zip file


Classified.zip 182k .zip file
 

Attachments

·
jonnyblaze
Joined
·
4,328 Posts
Discussion Starter · #4 ·
Quote:
Originally Posted by FtW 420 View Post

Nice! Highest valley score with a 780 to date, & ahead of quite a few Titans!
I know I could go much higher but I am hitting the 115% power limit. I haven't throttled yet though. I can still raise the voltage another .05.

I need a custom bios so bad. Could I edit the bios with Kepler Bios Tweaker. I will try.

Ya I beat one of my old titans already. I still have another card to test.
 

·
Registered
Joined
·
436 Posts
EvBot would be for greater than 1.35v. He should be able to reach 1.35v once he increases the Power Target to say 200%, like in KingPin's demo.

Great score!!
thumb.gif
 

·
jonnyblaze
Joined
·
4,328 Posts
Discussion Starter · #9 ·
Quote:
Originally Posted by provost View Post

would u use evbot? i had heard that voltage control should get u to 1.35v, but looks like not..hmmmm
redface.gif
I can go to 1.35v I just haven't yet becuase I am already reaching my power limit. I need a custom bios.
 

·
jonnyblaze
Joined
·
4,328 Posts
Discussion Starter · #10 ·
Quote:
Originally Posted by USFORCES View Post

Nice and water would be the way to go with these cards..
I know, could you imagine this card with a waterblock and a custom bios and the evbot. My evbot should be here Monday. Right now I am doing this on the stock bios and air and I haven't even maxed out the voltage tool. I think this card could reach some crazy speeds with a custom bios.

I tried editing the bios in KBT but it didn't work. Can anyone mod this bios for a higher power limit.
 

·
Registered
Joined
·
837 Posts
I was playing with the overvolt tool with my 770 classified. I only have 1 card atm due to one of my cards being a bad egg. But I was getting ready to post on ocn but seen this thread. I still have .5 volt I could go up but heres my results without too much hassle to get them. 1371mhz gpu and +330 on the memory @ 1.312. Hoping to get my other 770 classified and it can do the same. Here is my Valley results, pretty happy with it so far I know its not a 780 though
smile.gif
Figured I would share since its about the classified overvolt tool, people may want to see the 770 with it.

http://s2.photobucket.com/user/04LiQuiDsiLvEr/media/770x11312150330valley_zps13f4aaff.png.html

http://s2.photobucket.com/user/04LiQuiDsiLvEr/media/770working_zpsc818d405.png.html
 

·
Registered
Joined
·
84 Posts
Quote:
Originally Posted by OleMortenF View Post

What are the 3 different adjustments in the tool for?
smile.gif
^ this....

I know that one is pci-e voltage or something... but I don't know what effect they have or the possible dangers. Anyone?
 

·
Registered
Joined
·
837 Posts
Quote:
Originally Posted by oldmanmax View Post

^ this....

I know that one is pci-e voltage or something... but I don't know what effect they have or the possible dangers. Anyone?
I didn't mess with them as I wasn't sure. I asked on evga forums but no response yet.
 

·
Registered
Joined
·
2 Posts
Sorry for the basic question. Is this tool only working with evga classified or you can use it with another brand too?
 

·
Registered
Joined
·
837 Posts
Quote:
Originally Posted by iAlphard View Post

Sorry for the basic question. Is this tool only working with evga classified or you can use it with another brand too?
I read that the classified cards have a special volt controller and is meant for them. Not sure how accurate it is, however. Maybe someone can chime up that knows more about it, but I do know I read that.
 

·
Registered
Joined
·
2 Posts
Quote:
Originally Posted by NoDoz View Post

I read that the classified cards have a special volt controller and is meant for them. Not sure how accurate it is, however. Maybe someone can chime up that knows more about it, but I do know I read that.
Ah i see, thank you for your reply. I also tried it, but nothing happened. So i guess evga classified really has a custom volt controller.
 

·
Premium Member
Joined
·
10,558 Posts
Quote:
Originally Posted by OleMortenF View Post

What are the 3 different adjustments in the tool for?
smile.gif
I don't know for sure with this particular card, but the usual 3 voltages that are given software control are the gpu, memory, & PLL.
 

·
jonnyblaze
Joined
·
4,328 Posts
Discussion Starter · #19 ·
This volt controller definitely works for 770 and 780 classifieds. they have a special voltage controller. I have no idea what the 3 adjustments are but I copied Kingpin's screenshot and set the values that way and played with the voltage myself.

Right now until I get a modded bios I am stuck because I am hitting the power limit. I know it's a long shot but I emailed Kingpin for his 200% bios.

Does anyone know how to mod these bios?
 

·
Registered
Joined
·
2,280 Posts
Quote:
Originally Posted by strong island 1 View Post

This volt controller definitely works for 770 and 780 classifieds. they have a special voltage controller. I have no idea what the 3 adjustments are but I copied Kingpin's screenshot and set the values that way and played with the voltage myself.

Right now until I get a modded bios I am stuck because I am hitting the power limit. I know it's a long shot but I emailed Kingpin for his 200% bios.

Does anyone know how to mod these bios?
tell him you are an ln2 guy, and wanna try it for HWBot
biggrin.gif

think some mods here are members of HWBot, may be they can pull some strings for ya
hit up Naennon to mod it, may be if u ask nicely
tongue.gif
 
1 - 20 of 21427 Posts
Top