Overclock.net banner

Ok i got my system designed now to buy

1406 Views 14 Replies 5 Participants Last post by  Blue_Fire
Swiftech storm g4 -Have $87.90 Total
Swiftech MCX159-CU Chipset Cooler -need
Danger Den DD12V-D5 Pump -need
SWIFTECH MCRES-MICRO SMALL FORM FACTOR RESEVOIR - found one i liked.-Have Total $26.92
77 Bonn -have 23.09 total
Danger Den Chrome Acetal MAZE4 GPU -need
10' Masterkleer tubing 1/2 inch(search for it here.) -Have $23.58 Total
1/2]Logisys 12" Dual Cold Cathode Kit UV -Have Total $17.11
PC Ice Red UV x2
Subtotal=$178.60 Total
Updated. version 1.6.4 with LINKS!
1 - 3 of 3 Posts

· Registered
Joined
·
344 Posts
Quote:


Originally Posted by Snerp

HAHA...good luck with that.

Yeah, CLR doesn't even take the waterspots (lime) off my shower door.


The trick would be removing the residue without ruining the radiator.


I'd say muriactic acid, but that might dissolve the radiator.

Well, Gods bless you--I'm not sure about you, but I'm somewhat bull-headed.
 

· Registered
Joined
·
344 Posts
Quote:


Originally Posted by Blue_Fire

the reason i was thinking about the junkyard is that i saw a transmission cooler in summit mag, that looked extreamly promising

Don't get me wrong--if one has the space, I think there is little downside to having a huge radiator. I was just concerned with getting it cleaned.

Hmmm... maybe I'll start a different thread on huge radiators.
 

· Registered
Joined
·
344 Posts
Quote:


Originally Posted by Blue_Fire

I thought so too, but tranny coolers are about the same width as a 120mm fan 240 mm long. its reletively small.

*Tranny* cooler!?


Come on man, you're talking junkyard wars here--look around!

Forget the heater core, I'm thinking *radiator*.


Has anyone tried just using a full size radiator? I'm wondering if that would keep water temps so close to ambient it would become a non-issue, with performance limited only by waterblock and pump. And it might even work with no fans...
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top