Overclock.net banner

Ok I need to see if this new rig will be decent...

483 7
Ok i have had a pentium 3 cpu, crappy gigabyte mobo, everything is bad.
So now i have decided to get a new rig. I think its farely good comp im not completely stupid on comps and the parts so i know what i have built.

Below will be the specs of the "core" things that will be in it.

ECS K8T890-A (1.0A) Socket 939 VIA K8T890 ATX AMD Motherboard - Retail
# AGP Slots: 1x AGP Express slot
CPU Type: Athlon 64 FX/Athlon 64/Sempron
DDR Standard: DDR 400 (PC 3200)
Dual Channel Supported: Yes
FSB: 1000MHz Hyper Transport (2000 MT/s)
Maximum Memory Supported: 2GB
Number of DDR Slots: 2x 184pin DDR
PCI Express x1: 2
PCI Express x16: 1
South Bridge: VIA VT8237R

AMD Athlon 64 3500+ ClawHammer 1GHz FSB Socket 939 Processor Model ADA3500ASBOX - OEM

64 bit Support: Yes
Cooling Device: Heatsink and Fan
Hyper-Transport Support: Yes
L1 Cache: 64KB+64KB
L2 Cache: 512KB
Multimedia Instruction: MMX, SSE, SSE2, 3DNOW! Professional
Operating Frequency: 2.2GHz
Process Type: 0.13 µm
Series: Athlon 64
Voltage: 1.5V

RAIDMAX Horizon 287WBP Black SGCC ATX Mid Tower Computer Case 380watts PS2 Prescott & SATA Ready Power Supply - Retail

SAPPHIRE 100110 Radeon X300SE HyperMemory 256MB 128-bit DDR HyperMemory (64-bit 128MB Onboard VRAM) 128-bit DDR PCI Express x16 Low Profile Video Card - OEM ----It was cheap and is decent.......

So that is basically the core things of that comp.
If anyone knows anything about any of these parts that is bad or a suggestion for a diff part in the same place but not much more expensive plz feel free to tell me!

Thnx Again,
Mr~Anarchie
1 - 8 of 8 Posts

·
Registered
Joined
·
402 Posts
Quote:


Originally Posted by Mr~Anarchie

What do you mean an "aftermarket cpu" ?

Plz explain which exact cpu i should buy!

Ty
Mr~Anarchie


he means a higher grade psu/known make psu e.g. enermax,hiper,ocz etc etc

agreed on the mobo you should get an asus or epoxy,also what ram are you planning on getting?
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top