Joined
·
424 Posts
I'm not sure how it works with your mobo, but I know that of the four SATA connectors on a mobo, the drive has to be connected to 3 or 4, which are locked just like the PCI/AGP/PCI-e frequencies.
If the connector you used isn't locked, then your FSB will be limited to around 220-230Mhz.
EDIT: Try hooking your SATA drive to one of the orange connectors by the CPU. Those are 3 and 4 of the NF3 chipsets SATA controller, and should be locked.
If the connector you used isn't locked, then your FSB will be limited to around 220-230Mhz.
EDIT: Try hooking your SATA drive to one of the orange connectors by the CPU. Those are 3 and 4 of the NF3 chipsets SATA controller, and should be locked.
