Overclock.net banner
1 - 7 of 7 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hey guys i just overclocked my CPU using * EasyTune6 * but after it was overclocked when ever i run a game it will blue screen, sometimes randomly will blue screen while idle. Google chrome sometimes randomly crashes now.

Is there something missing here? What is going wrong?

This is my CPU with no overclock on idle


This is my CPU with no overclock on 100% usage.


I will upload the images over the overclock in a few mins.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #2 ·
Ok this is it all overclocked on idle.


This is the overclock on 100 usage.


Does anyone see anything there that would be causing the bluescreens?
If any more info is required just let me know.

Thank you.
smile.gif
 

·
Registered
Joined
·
1,085 Posts
It would be nice to see your complete system especially Ram and mainboard. The best for it is to use the rigbuilder from OCN.
Which bluescreens are you getting?`The code is important to say more.
Take a photo from the bluescreen or use the program "Bluescreenview".

And i never recommend to OC with a software. You should use the Bios to OC.
The Vcore seems fine to me but maybe it needs a little bit more vcore. Did you oc your RAM too?
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #4 ·
The mainboard is a Z77-DS3H
Ram is 8GB of DDr3 1600mhz RipjawsX ( picture below )


Blue screens are here


Just some extra info. I'm new to all of this. Computer was made 2 months ago.
This CPU has been overclocked to 4.4Ghz on my old mainboard ( Z77-D3H ) With a 600w PSU with no problems.
Me being new and silly.... I blew my mainboard and my PSU by changing the voltage on the PSU to 110 from 220. Upsy!

This is now a brand new mainboard and brand new 650w PSU.
 

·
Registered
Joined
·
1,085 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #6 ·
I cant find my BSOD codes on there, Maybe they are there im just to new to find it. :S
My temperature seems fine when running at 4.4 100% but its just them dam blue screens... You think i may need to up my Vcore?
 

·
Registered
Joined
·
3,593 Posts
I dont know where you read anywhere that overclocking through software like the atrocious easytune would be a good idea.

I thought you couldn't overclock on the DS3H. Or you can't overvolt i think. The D3H is a better board.

The guide the guy linked above is the best guide I've seen on ivy bridge overclocking.

Don't worry about what blue screen codes you get. When people say 'x124 is vcore' or "x05 is ram', generally, they might follow a trend like that, but it's not very important. What's important is that instability occurred in one form or another, not how it manifested. More times than not, I've had x124, and the issue was faulty hardware or a RAM issue, not cpu vcore.

A program called WhoCrashed though, is very useful. Again don't read too much into blue screen codes or black screen vs blue screen. A crash is a crash.

You should really fill out your sig rig.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top