[Imglidinhere]

I want to push this Xeon of mine up to at least 3.5GHz. I'm about to invest in a small WCing setup for my GPU and an H50 for my CPU. Since a Xeon is a good bit different from the other CPUs out there, and the multiplier stops at x19, what's the easiest way to go about this?

 

[mitchbowman]

it should be the same as OCing any i7
just set the multi to what you want ( x19)
then just adjust the Bclk till you get the speed you want ( Bclk 185 Multi x19 will get you a 3.51Ghz oc)

i run x20 bclk of 200 for a spot on 4ghz oc ATM

hope it helped