Overclock.net banner

1 - 9 of 9 Posts

·
Registered
Joined
·
240 Posts
Discussion Starter #1
I found this in my manual and i was wondering if it can help me overclocking more easily.My current FSB is at 288 Mhz in bios.If i use this FSB Jumpers, i need to have my FSB at 200 Mhz before chinging them?If i put'em between 266-333mhz,when i overclock,would they increase the voltage as usual???
 

·
Registered
Joined
·
1,457 Posts
I don't know what those are, but overclock in the BIOS, nothing else.

And, if someone doesn't reply to your question in 7 MINUTES, don't bump/double post. On these forums you have to wait 12 hours to bump.

-FilluX
 

·
Registered
Joined
·
3,422 Posts
Quote:


Originally Posted by FilluX
View Post

I don't know what those are, but overclock in the BIOS, nothing else.

And, if someone doesn't reply to your question in 7 MINUTES, don't bump/double post. On these forums you have to wait 12 hours to bump.

-FilluX

Second That

I use programs such a SETFSB and Clock Gen for Death runs.

All stable Overclocking should be done in your BIOS nothing else

Yes Jumpers can help with your OC I never have done it before because it's holds a risk and could void you warranty of the board
 

·
Registered
Joined
·
1,457 Posts
Quote:


Originally Posted by minu94
View Post

I usually ain't patient...because i want my response to be soon to try that thing

I know it suxx when you don't get replys as soon as you want, but you just have to wait.
 
1 - 9 of 9 Posts
Top