Overclock.net banner
1 - 6 of 6 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hi guys im new here and new to overclocking...
I Just bought my new computer (last fried up
) and i want to know how can i get my memory to 533(1066) MHz cause i bought it for that and CPU-Z says that its working on 400(800) MHz



You can see my pc setting on signature, tnx
 

·
Registered
Joined
·
1,036 Posts
You have two options:
1. If your motherboard gives you the option you could simply change up the memory multiplier. That will simply let it run at a higher frequency, potentially up to 533/1066.
2. The other option would be to bump up your FSB which in turn will make your memory run faster. It may take a combination of FSB and memory multiplier tweaks to get your memory to that speed but it should be possible.
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
Got 533MHz memory freq by giving 2.18v to DRAM but FSB : DRAM is 3:8 thats not good i think huh?
"Bus speed" @ CPU-Z is FSB right?
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #4 ·
FSB was 200MHz on last try, i raised it to 400MHz and my computer couldnt boot, i got into boot after CMOS reset and "loaded" my last preset with 2.18v and 1067MHz option in memory clock
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #5 ·
FFS i think i fried the onboard sound card while raising voltage or something, audio is fcked up :x :mad:. Any1 knows what happened or something like this happened to him again?
 
1 - 6 of 6 Posts
Top