Overclock.net banner
1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi i whant to overclock my pc to speed up the gaming low frps every game i play the problem is that i dont now how to do it corectly so im asking for youre help i tryed 2 tutorials from the internet and i faield both so i dont whant to destroy my pc becouse im stupid
frown.gif
i whant to encrease the power to 3.2 Ghz stabel

This is my spec of the PC if you can pelase guide my exactly whant to do in bios please.




9250_spd_dden.jpg
slot 4 is the same , slot 1 and 3 is empty.


Thx for youre help.
 

·
Registered
Joined
·
1,490 Posts

·
Leader of the #1 [email protected] Team
Joined
·
5,013 Posts
Quote:
Originally Posted by AtomiS View Post

Hi i whant to overclock my pc to speed up the gaming low frps every game i play the problem is that i dont now how to do it corectly so im asking for youre help i tryed 2 tutorials from the internet and i faield both so i dont whant to destroy my pc becouse im stupid
frown.gif
i whant to encrease the power to 3.2 Ghz stabel

This is my spec of the PC if you can pelase guide my exactly whant to do in bios please.




9250_spd_dden.jpg
slot 4 is the same , slot 1 and 3 is empty.


Thx for youre help.
Click DEL when the PC turns on, go into BIOS, go to MB Intelligent Tweaker M.I.T. Then do this:

Robust Grahpics Booster: AUTO
CPU Clock Ratio: 10

CPU Host Clock Control: ENABLED
CPU Host Frequency: 320
PCI Express Frequency: 100
CIA 2: DISABLED

Preformance Enhance: STANDARD
XMP: DISABALED
(G)MCH Freq Latch: AUTO
System Memory Multi: 2.00

CAS Latency Time: AUTO
tRCD: AUTO
tRP: AUTO
tRAS: Auto

Load-Line Calibration: ENABLED
CPU Vcore: 1.250V
CPU Termination: 1.3
CPU PLL: 1.50
CPU Reference: AUTO

MCH Core: 1.150
MCH Reference: AUTO
MCH/DRAM Reference: AUTO
ICH I/O: AUTO
ICH Core: AUTO

DRAM Voltage: 2.00
DRAM Termination: AUTO
Channel A Ref: AUTO
Channel B Ref: AUTO

Any of the above settings missing? Just ignore them and continue
smile.gif


Also go to ADVANCED BIOS FEATURES and do this:

CPU Enhanced Halt: DISABLED
C2/C2E State Support: DISABLED
C4/C4E State Support: DISABLED
CPU Thermal Monitor 2: DISABLED
CPU EIST Function: DISABLED

Now go back to the Main BIOS screen and go to SAVE & EXIT SETUP, Press Y and let the PC Reboot. Should boot to Windows at 3.2Ghz
smile.gif


Let me know what happens!

(And yes i typed all that lol)
 
  • Rep+
Reactions: mxfreek09

·
Eastern Bloc Electronics
Joined
·
1,706 Posts
Temperature is good
thumb.gif
. You can even try cut Vcore a bit and then test again.And as bloodbath said fill the rigbuilder.
 

·
Leader of the #1 [email protected] Team
Joined
·
5,013 Posts
Quote:
Originally Posted by AtomiS View Post

Your welcome
smile.gif


Turn the Vcore down to 1.20V and see if it will do another pass at PRIME95.
 
1 - 7 of 7 Posts
Top