Overclock.net banner

Overclocking Q9400 to 3.6GHz - Max Voltage??

13326 Views 21 Replies 10 Participants Last post by  Caspr
Hi Everyone,

I just installed installed a Q9400 into my DFI Lanparty DK P35 T2RS mobo, and added a Xigmatek HDT cooler (with MX-2 thermal compound).

I can get to 3.2GHz no problem with ridiculously low temps and not much voltage.

But my goal is 3.6GHz.

So I jumped right to 450FSB (I know, I shouldn't do that). And then slowly increased the voltage. Now I am up to 1.312V for the core volatage (I am using a 333/667 ratio for the memory to keep it at 900MHz at 2.0V).

Is 1.312V too high? Intel says it can go up to 1.3625V, but this still seems high. Should I be adjusting other voltages?

Thanks in advance!
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top