Overclock.net banner

P3 Kill A Watt Electricity Load Meter and Monitor

1140 Views 25 Replies 17 Participants Last post by  shinji2k
NewEgg: P3 Kill A Watt Electricity Load Meter and Monitor

http://www.newegg.com/Product/Produc...nal-_-82715001

Keep an eye on power consumption - $14.99
  • Rep+
Reactions: 1
1 - 20 of 26 Posts
This is the normal price for it...
Quote:


Originally Posted by DuckieHo
View Post

This is the normal price for it...

Actually, their normally around $25 at most e-tailors
See less See more
i wanna get one of these haha
I paid Twenty something dollars a year or so ago from another site.
bought 1... damn... i need to quit buying things.

Bad design, but ill just put an extension cord on it, no big deal. Nice to check up on some things.
These are great, I just bought one myself...
Those are nifty, but my UPS (an APC) has a built-in LCD power usage readout. 350W folding!
Have a program for that with this motherboard, but can't get it to load to monitor the videocard. Suppose to energy manage the components. You'll luck up if your motherboard has one, and if it WORKS!
+rep

Just ordered one
I think I may finally pick one of these things up. I've been wanting to find out what kind of wattage my system is pulling.
It is funny when you get one of these. You run around checking everything you can think of just to see how much power it uses. I got one for $15 shipped from the egg a while back.

As mentioned, get a 2-3 foot 3 prong extension cord, makes it much easier to play with stuff (kind of hard to see behind a fridge and see how much power it is using, same for the putlet behind your desk.
I think Knitelife or one of the farm folders had it on one of their rigs and it was over 1000 watts.
These are nice to have, but they aren't the most accurate for computers. For one they can be easily tricked by active PFC, showing better than 100% efficiency. They also don't have a sampling rate that is high enough to catch transient loads. But any device like this under ~$150 will be in the same boat. I doubt there are many people willing to drop a couple bills just to know exactly how much their computer is using.
Quote:


Originally Posted by shinji2k
View Post

These are nice to have, but they aren't the most accurate for computers. For one they can be easily tricked by active PFC, showing better than 100% efficiency. They also don't have a sampling rate that is high enough to catch transient loads. But any device like this under ~$150 will be in the same boat. I doubt there are many people willing to drop a couple bills just to know exactly how much their computer is using.

True, it gives a good ballpark useage though.
It also does not take into consideration the PSU efficiency and such, so you know what the PSU is drawing from the wall, but not what the output is from the PSU to the system. This is one of the reasons good PSU review sites will have the AC input watts (the higher number) and DC output watts listed in their tests.
See less See more
Quote:


Originally Posted by shinji2k
View Post

These are nice to have, but they aren't the most accurate for computers. For one they can be easily tricked by active PFC, showing better than 100% efficiency. They also don't have a sampling rate that is high enough to catch transient loads. But any device like this under ~$150 will be in the same boat. I doubt there are many people willing to drop a couple bills just to know exactly how much their computer is using.

Ive had it for 2-3 years and it is pretty darn accurate. How can PFC fool it? o.0 No way it can, this reads actual power used BEFORE the device. My UPS and the meter always read the same, but the kill-a-watt updates much quicker which is pretty handy.
See less See more
1 - 20 of 26 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top