Overclock.net banner

1 - 15 of 15 Posts

·
Registered
Joined
·
471 Posts
Discussion Starter · #1 ·
So I was overclocking and I had to exit bios and it started updating romsip table and my dads girlfriend started to blow dry her hair and the breaker popped in my room turning off my computer and now it wont boot back up, I have tried removing the battery and moving the jumper over. Any other methods I could try? or is my board toast?
mad.gif
 

·
Registered
Joined
·
744 Posts
When you power it on, what does it do? Unplug the power cord, and hold the power button for around 10 seconds. If that doesn't work, then it probably is toast. It sounds like it was updating and writing the bios to rom when it lost power.
 

·
Registered
Joined
·
744 Posts
nothing to the display? Do you have a spare video card that you could swap in? Take out the memory and reset them as well, same with the power supply power connections on the motherboard.
 

·
Registered
Joined
·
471 Posts
Discussion Starter · #9 ·
Okay I have an idea, I have this 775 pentium 4 processor to try in my board to see if I can get it to re update romsip table. Do you think that will work?
 
1 - 15 of 15 Posts
Top